MX-3.com

Im looking to get an intake for my 1995 1.6 dohc. I know there are thousands of posts on this but I have searched for the past few days and havent had my questions really answered. I noticed that I could possibly use an integra intake with some modification. Some of them that ive seen only have one nipple for a hose as well as no opening for my MAF. Im assuming that I will need to cut it somewhere for this to fit? Anyway, what would your advice be for these intakes. Thanks

http://cgi.ebay.com/ebaymotors/FALKEN-C ... ccessories" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/94-01-AC ... 190wt_1160" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/94-95-97 ... 3379wt_911" onclick="window.open(this.href);return false;

or none of the above?

Why did you make two of the same posts? It's annoying... delete one.

Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..

this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

umcamara wrote:Why did you make two of the same posts? It's annoying... delete one.

Anyhow, I'm looking at doing this soon as well. I'm a '96 B6DE, so same thing. There are Integra kits with 2 or 3 nipples. Keep lookin... And don't forget you can always add nipples if you need, or just use breathers on the hoses..

I did not purposely post up 2 of the same ones. OOOOPPPPPS. Ill see what else i can find

RS_OBD'oh_2 wrote:this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

OOO i gotcha now, I was unsure of the placement of the MAF. What other couplers would i need as well as the modification? Ill search again and see what i can find a second time. thanks

I don't know.. get a tape and measure the maf, the filter, the intake pipe. You may have to wait till it arrives to do this. Not really complicated.

RS_OBD'oh_2 wrote:this is done to death!!!
Please search again.
None of those are any good.
You need 3 nipples for the best fit, they will also need to be located near the elbow off the TB. I don't understand what you are saying about the MAF.... you don't need a hole for it... it fits in line... being the CAI is a pipe... the entire thing is a hole and you can just get a rubber coupler and poof.

A Probe GT short ram could work as well. will need some modifications and some extra rubber couplers

http://cgi.ebay.com/ebaymotors/1993-199 ... 27b0cecf15" onclick="window.open(this.href);return false;

maf would go just after the filter

With this intake will I keep the acordian looking pipe in the beginning? Like this one http://cgi.ebay.com/ebaymotors/93-94-95 ... ccessories" onclick="window.open(this.href);return false;

sorry for all the questions, Just making sure
thanks alot

Really?

Anything can be done, up to you.

How about these ones?! They look similar to the probe ones

http://cgi.ebay.com/ebaymotors/99-00-HO ... ccessories" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/99-00-Ho ... ccessories" onclick="window.open(this.href);return false;

looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.

RS_OBD'oh_2 wrote:looks like it does not have enough of a bend.. but for under 20.00 just try it. Not a loss if you have to buy a few.

Yea I was afraid of the bend problem