[WTB] 1992 GS Gauge cluster. My CE is burnt out and clock
[WTB] 1992 GS Gauge cluster. My CE is burnt out and clock
Let me know Diamagus@yahoo.com" onclick="window.open(this.href);return false; or pmt
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
So just replace the bulbs. You don't need a whole new cluster.
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
Amusing, The clock isn't illuminated with a "bulb" ;P
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
Never looked at the clock, but the CEL is for sure.
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
If US I have several- 40 plus shipping AND packing and I'll let you decide on which mileage from my stock of 5 or 6 of them. please email me paydiesel@yahoo if interested.
![Image](http://www.patdiesel.atlantamx3.com/MX-3/patdieselsigMX-3.jpg)
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- slayer322
- Regular Member
- Posts: 125
- Joined: October 3rd, 2009, 11:41 pm
- antispam: No
- Location: Cambridge, Ontario
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
i have a CAD cluster from an OBD1 MX-3, with the low fuel light, PM me for details
1996 Mazda MX-3 GS - DD / Always a project Car
ZE + Pacesetters = <3
ZE + Pacesetters = <3
-
- Regular Member
- Posts: 1751
- Joined: November 2nd, 2009, 3:03 am
- antispam: No
- Location: Vancouver, BC
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
i have the actual clock part of the cluster... $10+ shipping if your interested. very easy to change, its held on by 2 or 3 screws.
-
- Regular Member
- Posts: 106
- Joined: October 17th, 2006, 12:12 pm
- Location: simcoe
- Contact:
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
where r u from?
1992 mx3 gs Klze with Powder coated black Curved neck Manifold. Hot shot performance CAI, ford probe Gt ECU and MAF
http://www.cardomain.com/ride/2197073
http://www.cardomain.com/ride/2197073
-
- Regular Member
- Posts: 1751
- Joined: November 2nd, 2009, 3:03 am
- antispam: No
- Location: Vancouver, BC
Re: [WTB] 1992 GS Gauge cluster. My CE is burnt out and cloc
vancouver. replace the bulbs in your cluster thow. i was looking at one i got from the wreckers that the clock didnt work in and when i ripped it all apart i found that the power lead for the clock ran threw the circuits for a couple of the bulbs. if one of the bulbs is broken it causes a short in the circuit and cuts off power to the clock. i ended up just taking the parts i needed and threw them in my new cluster so i dont know if that will work for sure but it cant hurt to try.