MX-3.com

i know for a fact i have a millenia 2.5 which im fine with. still hauls a--. but i am planning on putting a turbo on my car. and i was wondering how to tell if i got the millenia s inlectors?

you dont. Millenia S injectors only came on the 2.3 liter Miller cycle engine

yours will be blue tops, same as all the 2.5s

would they handle 4 to 6psi. if i was running a turbo?

At 5psi the stock injectors would need about 80 psi fuel pressure and would be near maxed out.

You don't seem to know much about forced induction, i'd suggest to pick up this book http://www.amazon.com/Maximum-Boost-Tur ... 439&sr=8-1

Especially the Fuel Injection chapter will give you everything you need to know as far as calculating fuel pressure required if you plan on running low boost on the stock ecu with an FMU or adjustable fuel pressure regulator. Also will help you with fuel pump requirements, FMU ratio, intercooling etc.

It covers everything very well for the beginner, GL

My stock injectors max out at 8 psi. Anything over 5psi you are risking a stuck injector = boom

I have been maxing my injectors for 3 years now tho.

Millenia s injectors + megasquirt = win on a turbo application.

Is their a Supercharger book too?