Page 1 of 1
need ic piping pic's from failed turbo kit bb plus couplers
Posted: April 24th, 2009, 9:27 pm
by Dali
hey does anyone have a picture of the intercooler piping from the failed turbo kit bulk buy. going to try and get it installed soon but i dont know how the piping goes together and im after the couplers and t-clamps. 2 of the peices of pipe have hangers welded right on the end so i have no idea how these will work since i cant get couplers to join these ones??? just pulled the stuff out of storage and didnt have more than a minute to check it over.
also need to know how many and size of the couplers i need for this setup.
Re: need ic piping pic's from failed turbo kit bb plus couplers
Posted: May 4th, 2009, 3:54 am
by Dali
anyone?
Re: need ic piping pic's from failed turbo kit bb plus couplers
Posted: May 5th, 2009, 10:10 am
by solo_ryder
Are these the pics that were made on babyblues car? I have some if that's the case but they are on my laptop.. I will post em up when I get home from work.
On a side note, why not run water or meth injection, no intercooler or piping and can be made for 200ish bucks..
Re: need help fitting ic piping and couplers.
Posted: May 5th, 2009, 11:47 am
by Dali
well i think i have it figured out....sort of. these are 4 peices and i think this is where they
and there are another 3 not with the ones under the hood
the one on the right is 2 3/4" and i think its for the air filter to the turbo. now i think this one is screwed up. there is a hanger welded right on the end of the pipe so it cant be joined to another pipe with a coupler.
Re: need ic piping pic's from failed turbo kit bb plus couplers
Posted: May 5th, 2009, 11:48 am
by Mooneggs
oh wow that's awkward... design fail?
