MX-3 Baby Seat
-
- Regular Member
- Posts: 32
- Joined: January 2nd, 2009, 2:59 am
MX-3 Baby Seat
Hi there,
I'm an MX-3 driver, with a pregnant wife... can anyone out there assauge my fears, and tell me that I can fit a rear facing child seat in the back seat? Is there any particular brand of child seat, and/or do you need some special kit or anything? any help would be appreciated, I don't want to have to get *gasp* an MX-6 or something... somebody please help me.....
I'm an MX-3 driver, with a pregnant wife... can anyone out there assauge my fears, and tell me that I can fit a rear facing child seat in the back seat? Is there any particular brand of child seat, and/or do you need some special kit or anything? any help would be appreciated, I don't want to have to get *gasp* an MX-6 or something... somebody please help me.....
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: MX-3 Baby Seat
a couple years ago when i worked at tim hortons a guy with an mx3 would come through and he had baby seats in there, im sure they fit.
NEED PARTS INSTALLED? PM ME!
- boosted_bullet
- Regular Member
- Posts: 285
- Joined: June 24th, 2008, 4:53 pm
Re: MX-3 Baby Seat
yeah ive fit one in. i dont know what brand it is. also i had to slide the seat up a bit
chicks dig the rice!
-bullet
-bullet
Re: MX-3 Baby Seat
Okay this thread gave me some hope. I am pregnant, and currently looking in the option of rear facing infant car seats, and it dawned on me the rear seats are contoured, not flat. I was worried that infant car seats might not fit into the backseats.
Did OneBrickShy ever find herself a good seat that fit?
I have a 95 MX3 Precidia... and I don't want to get another car. I was also wondering if there is possibly an insert for the seat to make it level.
Any parents out there with any helpful advice?
Did OneBrickShy ever find herself a good seat that fit?
I have a 95 MX3 Precidia... and I don't want to get another car. I was also wondering if there is possibly an insert for the seat to make it level.
Any parents out there with any helpful advice?
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: MX-3 Baby Seat
I am nowhere near a parent, but I do know in the trunk, on the pasenger side, on the floor, there is a little metal tower with a threaded hole on it that is meant to hold a clip for child seats. Not sure if you need a clip in the trunk like that for a rear facing seat, but I know they exist, and I know my project car has one sitting in it(which I won't use for another 10 years at least) that I could ship over, if need be.
Also, I know that the mx3 rear seats fit in the back of a 323, so I don't see why the reverse isn't possible. I know the 323 seats are less contoured. This is only true for the seat bottoms, as far as I know. Go check out a scrap yard, it would likely be very cheap.
Also, I know that the mx3 rear seats fit in the back of a 323, so I don't see why the reverse isn't possible. I know the 323 seats are less contoured. This is only true for the seat bottoms, as far as I know. Go check out a scrap yard, it would likely be very cheap.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Re: MX-3 Baby Seat
I think you meant himself. Anyways, yes there is clips for carseats, give mazda a call, they can't be expensive. I refuse to believe that.BeeLove wrote:Did OneBrickShy ever find herself a good seat that fit?
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
-
- Regular Member
- Posts: 32
- Joined: January 2nd, 2009, 2:59 am
Re: MX-3 Baby Seat
Yeah, I actually just got one of those "H" shaped clips, that hold the seat belt to one length. (ask at your prenatal class. They'll show you). Anyway, it's pretty easy, put that clip in, and attach your car seat base, and Bob's your uncle. even with the contoured seat it's fine. I put mine behind the wife's seat, so she has her legs a bit scrunched, but... she's the one who screwed up the pills... lol. So, anyways, I figure I can drive an MX-3 until she gets pregnant with the 3rd child... so we have time. After that, I don't know what. Seriously, I stress about it. MX-3 is the only good car ever made, really.... MX-6 is okay, but... not for 3 kids. 626 V6 has a good engine, but that's it really. No good for tall guys, and handles like crap. Anyone have any suggestions???
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: MX-3 Baby Seat
minivan?
hahahahhahahaha....
No seriously, the Mazda 5 is pretty sweet.
hahahahhahahaha....
No seriously, the Mazda 5 is pretty sweet.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 32
- Joined: January 2nd, 2009, 2:59 am
Re: MX-3 Baby Seat
Yeah, maybe by then I can afford a used Mazda5... good call... I've been getting lots of "MPV" jokes.... But I got a couple of years to enjoy my MX-3 anyways....