MX-3.com

http://www.stevemeadedesigns.com/board/ ... opic=38200

Check it out, tell me what you think? I am going over tomorrow to mount the pods in the doors, and finish the box and prep for paint... The guy making them for me is hooking me up!!

looks sweet, get lots of pictures when ur finished!

looking pretty good, good thing youre coming to kelowna. you can show off your stuff.

Nice, same neuman from clubprotege, he does nice work.
Looking good so far!

let me tell you what i think about it





im jealous

i dont know if thats how you write it but you know what i mean...

nice!!!

Very cool! Keep us updated.

Nice job, I'm just curious why you chose plywood over MDF?

That is what he had. The bottom is plywood, but inside the sub encloser it has been fiberglassed, a lot.... And the other parts of the enclosure is MDF.

Oh and if anyone would like a set of door pods he can make pretty easy since I have 2 sets of extra door panels . They are pretty sweet!!! Running 10gauge through the door was the hardest part!!

More pics after tonight!

clayton said he had posted this up so i figured i would comment.

yeah its the same neuman as cp.com or any other board with the user name neuspeedescort! LOL

if anyone wants stuf done just contact me via PM, IM, or email. i got a set of rear speaker mounts from that mx3 i parted out i was thinking of making pods on but would like a buyer adn speaker size before i invest time and money in them.

the only parts that are plywood are the base floor template and the amp rack plates. i layed between an 1/8"-1/4" of glass on the box floor area so its not going to play any factor in strength. when building floors like that plywood is stronger then mdf or other forms of partical board. since its only 1/2" thick.

clayton came over the other night and helped lay out the base coat of bondo. an i sanded on it a bit lastnite while he finished installing his door speakers. would have been all done thursday if someone wouldn't have busted his speaker spade! still need to get some daytime pics of them.

EIDT: i updated the SMD.com post.


NEUMAN

Just got back from a nice long road trip with them in, and they help out a lot!!! I can't wait to hook them up to the amp!

BuGS wrote:Just got back from a nice long road trip with them in, and they help out a lot!!! I can't wait to hook them up to the amp!

yeah once you get soem real power on them your not going to know what to do.


NEUMAN

linked site thread updated today. couple days off of sanding are in order!


NEUMAN

very nice work, nice gear aswell... makin me miss my mx-3. If I were you guys I'd consider a group buy on those door pods. Can't wait to see it finished, I'm trackin the thread on smd.

if i could get enough people to want them i would build a few more sets.

just the tweeter size and the magnet of the driver would make things easy or hard. i could play with the position of the driver a little to make it more universal.


NEUMAN

SMD was updated with the spiderman milk pics!!! Neuman just finished a lot of sanding and still needs a couple hours then it is off to paint!!

check it out!!!