CARBON FIBER HATCH BULK BUY

This forum is only for posting information pertaining to group buys. (Administrators must give access to group buy organizers before a new group buy is added.) Please contact forums@MX-3.com" onclick="window.open(this.href);return false; to be given access to this forum as only group buy organizers will be allowed to post here once it is set up. MX-3.com holds no responsibility for the validity of any Group Buys that are posted in this forum, so be sure to research who you are dealing with before sending your money.
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

For daily posts, please check:

http://www.mx-3.com/phpBB3/viewtopic.ph ... &sk=t&sd=a" onclick="window.open(this.href);return false;

This thread has gauged that we can get enough commited ppl for me to start a BB.

THE PRODUCT HAS BEEN COMPLETED AS OF NOVEMBER 29. SHIPPING WILL START MONDAY DECEMBER 1ST.

THE FIRST DELIVEY IS TO COLIN AS WELL AS FURTHER TEST FIT SHOTS DONE WITH BETTER LIGHTING.

Official weigh in:

OEM Glass: 48 lbs
OEM Frame: 28 lbs
CF Frame: 12lbs

Lexan window will cut that number down dramatically but due to legal issues, it will not be offered.

$600 + shipping for Carbon Fiber

$500 + shipping for fiberglass

Coloured fabric extra $100

$USD at par with $CDN

AT LEAST 10 guys + donor. Being the donor entails removing the hatch and glass.

Payment structure:

Paypal :oscardevesa(at)gmail.com

Dep 1: $207
Dep 2: $207
Dep 3: $207 + shipping cost


PLEASE INCLUDE YOUR DONATION TO MX-3.COM IN YOUR FINAL DEPOST!!!


1.) Colin (Colinsmx3)(Donor) ---- CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
2.) Mike Fortin (Nd4SpdSe) ------ CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
3.) Jonathan Kwok (Flyer) -------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com]
4.) Mark Koerbel (Mooneggs) ----- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
5.) Dana Thomas (stereoking15) - CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
6.) Nic Maukonen (Demonicdst) -- CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
7.) Chris Sanders (Hotsiit) -------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
8.) Cody Brooks (tehbrookzorz) -- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
9.) Jarid Perry (Cjthor) ----------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
10.) Jesse Fowler (Fowljesse) --- GFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
Last edited by EZ_4_FUN on September 28th, 2009, 3:51 pm, edited 49 times in total.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

I am now taking deposits. Please PM me for specific information and before sending any money.

I need all those interested to PM me you complete information including pnone number

I will make special accomodations as long as agreed upon before receiveing payment.

Price per Hatch will go up after the initial BB is complete so get in on it if your interested.

This price cannot be beat nor will you find this product anywhere else!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

I'll be picking up the hatch today! Starting the tooling on Monday despite everyone not having paid their first deposits.

Please get your payment in or email me wrt it so that I account for everyone. The last thing I need is to see ppl on the committed list dropping like flies now that deposits are asked for...
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

The hatch looks good; some minor scratches but that will all come out with a good wet and after the mold is done.

By next week I expect to start the tooling and have it completed within a week of starting give or take.

Please PM me if you forsee any troubles getting your second deposit in by October 1.

Thats just under 3 weeks from now. Please PM me and advise so I have an idea where we stand, I have not heard back from all those with their fiirst deposit outstanding.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

If you have not made your first deposit, please do so at your earliest convenience.

Thanks!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

I should have a prototype by Friday so please prepare your second deposits for the second week of October!!!.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

To make it easier for those in on the BB, I will split the donation with you. In other words you pay $15, I will cover the rest!

Please include your donation to MX-3.com with your second Deposit. Dont forget 3.5% for paypal fees!!!

Thanks!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

Dajanxman appears to be the only member unpaid and not willing to respond to any of my PM's.

This still leaves us at the minimum 10 which is ok!

Friday is only days away. I expect to have something by then.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

Patience is a virtue of which not many have; I on the other hand have lots.lol.

Sorry but I don't have what I expected to show you guys today. Hang tight as we are way ahead of schedule anywho and will surely have a ready product before our proposed deadline of October 31.

Cheers,
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

By mid next week, I should be test fitting our first pull from the mold.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

I'm hoping to have enough time tomorrow after work to head over to the shop and snap some pics just to please the masses. So far everything seems to be ok, I need to look at the small glass partition to make sure we don't have any issues as that is the complex part for the mold design.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

Pics! What you are looking at is the original hatch used to make the mold, the bottom mold, top mold and the top half of the CF hatch.

We still need to make the partition and layup the bottom part. By next week I will have the first part.

Image
Image
Image
Image
Image

Yes, I realise the cutout for the window is not done; don't worry, everything will be as agreed.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

I'll have a finished part later this week.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by EZ_4_FUN »

Honestly, I'm so excited about the way the hatch turned out, I'm gonna hold off on the pics until tomorrow just to get you guys rowdy tomorrow...

Technical specs:

-OEM Hatch w/ glass: 77 lbs.

-OEM Hatch w/o glass: 28 lbs.

-CF Hatch w/o glass: 12 lbs.


One can deduce the glass is 49 lbs and savings of 16 lbs in the structural component itself. Needless to say I'm impresed with the overall rigidity as well; the frame is stiff and sits extremely well on the car.

The cutout for the little window is just as discussed and looks great. All the threads are done for the 3rd brake light and wiper motor as well as the studs for the hinges... Totally awesome.
Last edited by EZ_4_FUN on November 21st, 2008, 11:58 pm, edited 1 time in total.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
cjthor
Forum Moderator
Posts: 5018
Joined: November 26th, 2000, 2:01 am
Location: Portland Oregon
Contact:

Re: CARBON FIBER HATCH BULK BUY

Post by cjthor »

EZ_4_FUN wrote:Honestly, I'm so excited about the way the hatch turned out, I'm gonna hold off on the pics until tomorrow just to get you guys rowdy tomorrow...
.
Rowdy Rowdy!!! Pics Pics!!!
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
Post Reply

Return to “Parts Group Buys”