Page 1 of 1
Stereo Wiring
Posted: July 29th, 2008, 2:42 pm
by Matt
1992-96 Mazda MX3 Stereo Wiring
Constant 12V+ Blue/Red
Switched 12V+ Blue/White
Ground n/a
Illumination Red/Black
Left Front (+) Blue
Left Front (-) Blue/White
Right Front (+) Blue/Red
Right Front (-) Blue/Yellow
Left Rear (+) Blue/White
Left Rear (-) Blue/Green
Right Rear (+) Blue/Red
Right Rear (-) Blue/Green
Incase anyone needs to know
Re: Stereo Wiring
Posted: November 6th, 2008, 9:25 pm
by markm
thanks for the info, save me looking around on the internet. and its trustworthy.
Re: Stereo Wiring
Posted: November 6th, 2008, 10:58 pm
by Ryan
That info was on here before.. I'm sure because I used it...
Re: Stereo Wiring
Posted: February 16th, 2009, 2:18 pm
by garretc16
Thanks YOU!
Re: Stereo Wiring
Posted: February 16th, 2009, 7:25 pm
by Evo_Spec
hum...so that's what the red/black cable is for, sweet, guess i can hook it up now
Re: Stereo Wiring
Posted: May 19th, 2009, 12:27 am
by Motoxxx
Very helpful, the exact reason I logged in, thank you!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Stereo Wiring
Posted: June 10th, 2009, 8:41 pm
by Dark_Rider2k3
OHHH the red/black is for illumination!! SWEET
Re: Stereo Wiring
Posted: March 14th, 2012, 10:26 pm
by granddad111
easy as ta for that from nz carnt buy a manual from mazda here cheers mike
Re: Stereo Wiring
Posted: October 22nd, 2012, 6:24 am
by Dragon1212
RED BLACK CABLE!!!!!! hopefully this fixes my illumination not working, i think the previous owner attached it to a power line as it caused my sisteres interior to be full illumination whenever it was on hopefully this is my issue too...
Re: Stereo Wiring
Posted: January 19th, 2016, 12:29 am
by BornSticky
The wiring was different on my 96 by alot
Re: Stereo Wiring
Posted: January 19th, 2016, 12:32 am
by BornSticky
Re: Stereo Wiring
Posted: January 20th, 2016, 5:32 pm
by Daninski
old post dude
![Razz :P](./images/smilies/icon_razz.gif)
Re: Stereo Wiring
Posted: January 20th, 2016, 5:36 pm
by BornSticky
Its the only help i could find for it so i added my solution incase someone else needs it in the future.