Page 1 of 1

car fever in Montreal ,tomorow

Posted: June 14th, 2008, 1:24 pm
by kab-rst
i just subscribe to the semi-pro comp at napierville, where our car fever show is is held this year

13.5-14.9 i did constant high 13, wich puts me in a pretty good stand

wish me luck, i'll bring pic n movies this week
hope i wont explode my newly restored tranny

Re: car fever in Montreal ,tomorow

Posted: June 17th, 2008, 9:33 pm
by Limegreen mx-3
as long as u baby the trans might make it last..

if not well u'll know what will happen

but good luck

Re: car fever in Montreal ,tomorow

Posted: June 18th, 2008, 12:42 am
by fowljesse
Good luck representing!! Kick Asphalt!
I can't wait to see the movies!!

Re: car fever in Montreal ,tomorow

Posted: June 18th, 2008, 1:19 am
by kab-rst
i got kicked out after beating my own record, even if it was like 38 celcius outside

my bracket was 13.7, since i haden't toutched it since i swapped the new turbo, and i had just swapped my tranny.

i ran like usual with the tranny, but had EXELENT traction after the third run

13.8@104
13.9@104
14.9(let go in 4th, almost overheated,after 1h in line)

went back, against a twin engine swift(3cyl turbo in front, 3cyl turbo in the trunk) he ran constant flat 13@10psi
i did 13.7 on that one, and decided that it's my best bracket time(yeah, got beated the hell out by a swift)

i raced against a cobalt ss stage 3 that ran mid 13 too, but i ran an exelent 13.52(beating my own record by 3 tenth :lol: YAY!!!

i decided not to buy a buy-back run,since nothing happened to the car, and ran such good time

at the end, it was a pretty good day

here some pics
cleaned the car, buffed, wax,compound etc.
see a difference?
Image

our little convoy,type-r,vr6,rs-t,300z,gts celica and ford probe show car, had 2 skyline and a corado too, not on pic
Image
setup
Image
Image

time slip of death
Image
crappy quality, only i got for now,but you can hear the huge amount of traction
Image


i dont have much for now, but i'M headiong back to napierville dragway july 4th, i should be at 20psi by then