Greetings!
My timing belt broke in my 95 RS. I have pulled the engine and completely dissassembled it. I am now putting it back together and rebuilding it. When I put the new timing belt on, how do I line up everything since the belt broke, and probably is not in the right position.
Any help is greatly appreciated.
Thanks!
Timing Belt Broke; engine is disassembled
-
- Regular Member
- Posts: 93
- Joined: September 11th, 2006, 10:22 pm
- Location: Tampa Bay, FL
- Contact:
Timing Belt Broke; engine is disassembled
'94 Mx-3 RS - All Black - Fully Rebuilt B6 DOHC .020 over, CAI, 2 1/4" exhaust, SE Leather Seats, Pioneer DEH-P4000UB, JVC 6.5" in the doors, Rockford Fosgate 400W, 2 12" Dual Subs in Bandpass Box
Re: Timing Belt Broke; engine is disassembled
just go to the online shop manual B1-84 shows the timing belt reinstall
http://mx-3.com/manuals/showimg.php?fil ... B1-085.gif" onclick="window.open(this.href);return false;
good luck post again if you have any other questions its better being right the first time then going back and redoing it 2 or 3 times
http://mx-3.com/manuals/showimg.php?fil ... B1-085.gif" onclick="window.open(this.href);return false;
good luck post again if you have any other questions its better being right the first time then going back and redoing it 2 or 3 times
1995 mazda Mx-3 RS 1.6liter DOHC B6-DE