MX-3.com

So its bolt up time. Some have told me I got to modify the actuall manifold. Van anybody tell me what needs to be cut and re welded on the manifold it self.

fit it and find out... anything can be different on every manny.. start bolting it up and see where it rubs or scrapes or w/e than u know where exactly it needs to be modded IF it does..

your pipes and my pipes both come from the same manufacturer.


I just tried them onthe kfze and they bolt right up. No need to modify. Just the cross memmber and the bottom cross memeber you need to put some washers so it will fit.



This is WAY easier with engine out. Thats why I havent done it because I am doing the timing belt at the same time.