Page 1 of 1
Front Endlinks.... Possibilities???
Posted: June 20th, 2007, 11:23 pm
by atlantamx3
I am searching for front swaybar endlinks.
Does anyone know if there are any aftermarket endlinks available?
I was thinking about a heimjoint endlink set-up.
Anyone done anything similar?
Posted: June 20th, 2007, 11:27 pm
by atlantamx3
Posted: June 28th, 2007, 3:59 pm
by luisitol
Won't the Probe Endlinks interchange? If so you have several options available.
Posted: June 29th, 2007, 12:46 pm
by monty73741
luisitol wrote:Won't the Probe Endlinks interchange? If so you have several options available.
no its a different suspension
Posted: July 11th, 2007, 1:24 pm
by Yoda
Perry I may have some old R&D study drawing you will be intrested in from when we were looking and manufacturing rod-end end-link back in 1998/1999 but decided that there was enough of a market to go ahead with it. Send me a message on facebook to remind me and I'll try to remember to convert the CAD drawing to a fomat that you and easily display and email them to you. If this is where you are looking I'll have to locate the bill of material to make them.
Posted: July 12th, 2007, 3:16 pm
by projectmx
can't you just buy the pieces for pretty cheap and put it together? there is a shop down wher ei'm building my mx-3 i went through their catalog and i think i found the parts i need to make them
Posted: July 13th, 2007, 10:25 am
by PATDIESEL
You most certainly can do that, but getting the right sizes, quality, bushings/spacers and all that might be a trick. The best duty models are pretty pricey so that buying the wrong ones is going to stink. We, Perry and I, were hoping thatperhaps someone could lead us along the right path. Hopefully Vaughn can find that bill of material so that we have something to start with.
Posted: July 13th, 2007, 10:44 am
by projectmx
i guess i can hold off on mine a little longer to see what you guys come up with
Posted: July 13th, 2007, 10:47 am
by Bochek
Posted: July 14th, 2007, 12:53 pm
by projectmx
well you've had yours on a year how are they?
Posted: July 14th, 2007, 8:25 pm
by tehbrookzorz
Keep us posted on what brand/part numbers you decide are the most economic/highest quality so that those that are interested may build their own.
Posted: July 14th, 2007, 9:55 pm
by Bochek
projectmx wrote:well you've had yours on a year how are they?
actually
they never made it on the car..... waiting to do the gs subframe swap... longterm project.