MX-3.com

Posted: **April 26th, 2007, 11:39 pm**

were in the iat/maf am i sposed to plug it, i cant find a pinout anywhere.

Posted: **April 27th, 2007, 12:08 am**

dont use it

Posted: **April 27th, 2007, 1:35 am**

You should have a large, rectangular, boxy receptacle somewhere in your kitchen with a plastic liner.

You put the entire chip in there and shut the lid.

Posted: **April 27th, 2007, 2:21 am**

very good guys i heard its no good before, im not asking for opinions on it, im asking how to install it its for a comparison research all you need to know..so if anyone knows wich pin holes are for the iat please let me know.

Posted: **April 27th, 2007, 6:27 am**

mazdamx3sohc wrote:very good guys i heard its no good before, im not asking for opinions on it, im asking how to install it its for a comparison research all you need to know..so if anyone knows wich pin holes are for the iat please let me know.

You might want to just google around for how-to info if a search doesn't turn up some past thread on the BB. Seriously, I have a feeling that MX-3.com members universally sense our cred would be destroyed forever if posting a how-to for this particular "mod." Just a thought fwiw.

Posted: **April 27th, 2007, 10:37 am**

i wont be able to google it cuz mazda decided to integrate the iat with the maf..ill never find a pinout on google, i wouldnt know what to type in.

Posted: **April 27th, 2007, 1:26 pm**

A local dyno shop had a 99 integra up on the dyno. He dynoed at 110 to the wheels stock and then put a reistor chip on it and LOST 5 hp! What a piece of crap.

I swear to god, Atlantamx3 might has well be reading the directions that come with the chip.

Posted: **April 27th, 2007, 4:13 pm**

lol thats horrible. o well. im just doing a test thing with it. im not keeping it as i am swapping the motor anyways to a h22 out of a prelude....jk im getting a bp.

Posted: **April 27th, 2007, 4:44 pm**

I think 323 GTR harness colors might be the same as SOHC - but i am not sure-

just in case-

Also check this thread-
http://mx-3.com/phpbb2/viewtopic.php?t= ... 3b1039c3ea

Posted: **April 28th, 2007, 1:58 am**

so this chip is 2 sided and i see one thing for the iat, where does the other end go?

Posted: **April 28th, 2007, 3:06 am**

HAHAH omg u actually bought it? LOL sorry lol

Posted: **April 28th, 2007, 3:08 am**

s'ok forgiving. tourettes outbursts dont last long enough for you to click reply and type a whole thing laughing...refrain lol.

Posted: **April 28th, 2007, 12:02 pm**

mazdamx3sohc wrote:so this chip is 2 sided and i see one thing for the iat, where does the other end go?

Check the "manual" that came with the chip - if its "parallel" then it goes between the iat wire and gnd - if its "series" then you have to cut the iat wire and put it in series.

IMO if you dont know such a simple electrical concept you shouldnt be messing with the wires....

Posted: **April 29th, 2007, 1:54 am**

k thx for that, every opinion counts

MX-3.com

stupid ebay resistor chip

stupid ebay resistor chip