Page 1 of 1
V.S.S info..(swap bp)
Posted: April 23rd, 2007, 1:21 am
by MAPEXMX3
i bought a engine form a protege gt 91....short story are te best...evything set..accept my vss...im using the tranny from the protege...the problem is not the wiring (be there..done that) the mx3 vss is very to long and the gearing is up side donw..(turn in the wrong way)...my question is...in what year the protege gt use a electric vss...or on the mx3 wit a v6 engine..i thing there using the same tranny as the gt ..so a electric vss from a mx3 v6 will do...hum....
Posted: April 23rd, 2007, 11:47 am
by lost_mx3
PM Custommx3, he said in the faq "remove the speed sensor from the old tranny and put it back in the Protegé tranny. It bolts right up. Then plug the wires back." So it all should fit & work correctly.
Posted: April 23rd, 2007, 2:36 pm
by MAPEXMX3
ya..bolt right on..hum hum...but the vss from the mx3 is to long...and the gear grove are in the wrong way...so im not able to pass tru the o ring section on the mx3 vss...i am looking for a protege 95-98 vss..or ecort 95-98 or a mx6..v6...but i dont know if the mx6 got the same tranny..G25M-R..
Posted: April 23rd, 2007, 11:52 pm
by ariesdude
Posted: April 25th, 2007, 2:53 pm
by MAPEXMX3
THANK S ariesdude ..does was good tips....im working on it...looking for cable solution...or spacer solution....but for the spacer think...the gear look different on mi mx3 vss...