Page 1 of 1
A bit of hel needed...
Posted: January 21st, 2007, 4:26 pm
by lHowitt
I just bought a 95 precidia mx3 and the previous owner really screwed around with the stereo wiring and i'm unsure of how to get it up and going again. any help would be great. thanks a bunch ....
Posted: January 21st, 2007, 4:37 pm
by lowridah313
check the online manual for the wiring diagrams
Posted: January 21st, 2007, 4:38 pm
by lHowitt
common guys i know one of you can help me out. plleeease!!!
Posted: January 21st, 2007, 4:42 pm
by lowridah313
and what do you need to really know????
Posted: January 21st, 2007, 4:44 pm
by lHowitt
i need to know what the wiring diagram would look like or if that isn't possible, an explanation of how i might be able to get things fixed up. about all i know right now is which wire isthe ground wire.
Posted: January 21st, 2007, 4:45 pm
by lHowitt
lowridah313 wrote:check the online manual for the wiring diagrams
where would that be. i just joined this site a couple of minutes ago i'm not overly familiar with it.
Posted: January 21st, 2007, 5:04 pm
by lowridah313
its on the main page in the lefthand column
Posted: January 21st, 2007, 6:38 pm
by Vanished
http://www.mx-3.com/95manual/index.cfm
Section: T-J - BET - Audio
Page: T-J-005
but for next time, its on the left had side on the home page of mx-3.com as low ridah mentioned. I suggest exploring around the manual, get a feel for it. It's incredibly usefull.
Posted: February 4th, 2007, 9:42 am
by ScooterBovine
Volt meter for THE WIN!
Posted: February 5th, 2007, 9:24 pm
by 92blackmx3
ScooterBovine wrote:Volt meter for THE WIN!
good answer good answer lol
if ya need wiring diagram go to
http://www.installdr.com has wiring diagrams for all makes