Need pics/ photoshop mx-3 project

General Mazda MX-3 Discussions
Post Reply
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Need pics/ photoshop mx-3 project

Post by Hood-R Oliver »

I'm new here so sorry if this is in the wrong place. I've loved the Mx-3 since i saw it the first time. And i hope to own one in future.

Editing cars with photoshop is one of my hobbies and i've always wanted to do the mx-3 of course. But i need some pics for it:

Front bumper:
http://pakfeifertuning.com/store/popup_ ... 81ba1014d3

rear bumper:
http://pakfeifertuning.com/store/popup_ ... 81ba1014d3

z3 style fenders:
http://pakfeifertuning.com/store/popup_ ... 81ba1014d3

and carbon-look taillights, civic projektors and gtr-style spoiler ( im sure u don't need pics of em)

ALL PICTURES SHOULD BE IN THIS PERSPECTIVE!

front: http://img294.imageshack.us/img294/635/mx3etuwebll8.jpg

rear: http://img182.imageshack.us/img182/4453 ... webbl3.jpg

The pictures should also be as big as possible and clean cars and easy to cp to other pictures. I'm sure u understand what i mean.

----------------------------------------------------------------------------------
Edit: If u didn't understand, this is what i mean in other words: If u own a car with some of those mods ^^ please take a picture of your car in theese angles/perspectves:
http://img294.imageshack.us/img294/635/mx3etuwebll8.jpg

http://img182.imageshack.us/img182/4453 ... webbl3.jpg

and don't take pictures in rain :wink: . I understand that u can't just rush out to take pics and that it will take some time. And take as big as possible pics.
Last edited by Hood-R Oliver on December 5th, 2006, 7:14 am, edited 2 times in total.
Mx-3 enthusiast since 2004.
User avatar
Bling Bling
Regular Member
Posts: 1013
Joined: January 5th, 2005, 10:27 pm
Location: Airdrie, Alberta, Canada

Post by Bling Bling »

Not sure if this is what you mean...so here are a couple!!

Image

Image
Stacy Whitrick
MX-West Calgary
http://www.cardomain.com/ride/1335558 UPDATED June 6,07
94 GS, Green Envy Pearl QUESTION: Does my car fit the RICE category?
Image
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Post by Hood-R Oliver »

Thanks, but i meant i'd nead pictures of pakfaifer front and rear bumber, gtr-spoiler, civic projektors and carbon-look tail lights in those persectives like the red stock mx-3. But thanks anyway. :)

btw if u r the owner of that car could u take a few pics that the car is like in theese pics:
http://img294.imageshack.us/img294/635/mx3etuwebll8.jpg
http://img182.imageshack.us/img182/4453 ... webbl3.jpg

I hope u understand. :(

But the links r the key to understand how the car should b in pics and what parts i want.

Btw nice car! 8)

edit: perspective= angle :wink: or something like that, but u who photoshop cars understand.
Last edited by Hood-R Oliver on December 3rd, 2006, 6:13 am, edited 1 time in total.
Mx-3 enthusiast since 2004.
hharb
Regular Member
Posts: 595
Joined: October 16th, 2006, 12:40 am
Location: Ottawa

Post by hharb »

i have a red mx3 with a cf hood and cf tail lights. the paint is baaad tho. if that's what you're looking for i could take a few pics.
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Post by Hood-R Oliver »

Yeah, don't really care about the paint cause i only need to copy and paste the lights to this picture: http://img182.imageshack.us/img182/4453 ... webbl3.jpg

so thats why your car should b in same angle like in that picture.

And the tail lights and civic projekstors r the most important parts cause i might get some pictures of the bodykit and spoiler from one guy. But i thought it would b easier like this because i don't actually know him, i've just got his phone number and i know that he has that bodykit, and i'd have to text him first and ask for his e-mail and he might say no.

And i'd like pictures of a mx-3 with newer dash, and again the pics r to b in same angle like the links above!

Sory about my english, it's not perfect but i'm sure u understand. :wink:
Mx-3 enthusiast since 2004.
hharb
Regular Member
Posts: 595
Joined: October 16th, 2006, 12:40 am
Location: Ottawa

Post by hharb »

I got your pics dude. i've taken a few from slightly different angles, i hope the exact angle you need is in there... post your final pic once you have it done. couldn't post them but there's the link :D
http://hassanharb86.spaces.live.com/photos/
Last edited by hharb on November 24th, 2006, 11:31 pm, edited 2 times in total.
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

I hate those "eye lids" or whatever they are called when they are put on MX3s.
That just makes the car look like a chicks car or the male driver like a homosexual
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Post by Hood-R Oliver »

I haven't visited this forum for a while, i had lost all my hope with this topic. :o

hharb: Can u host those pics to imageshack? There r too small in that mesenger space. I need the pics as big as possible cause the pic that i'm editing in 2608x1952, what is quite big, so if i copy paste a part from a small pic it will go blurry and look unrealistic and s---. Don't really need any under 1024x768 sized pics cause i can't use them.

I know it can b difficult to take some pics cause i'm really precise,and at least here it's winter (well all the snow has melted) but if the pics don't fill the standards above they r as good as nothing to me :(

And i know there's a lot of cars with these parts/mods so please help a teenager who can't buy a car yet to enjoy the mx-3 in his own ways. :D

I really need those pics of those parts/ mods cause i can't find good pics anywhere, i might get a few pics at spring but not sure yet and i want them now! :D
And sorry about my english, it's my other mother language cause my mum is half irish, but i still don't know how to spell perfect. :?

Edit: i forgot they can b slightly in a different angle but...
Mx-3 enthusiast since 2004.
hharb
Regular Member
Posts: 595
Joined: October 16th, 2006, 12:40 am
Location: Ottawa

Post by hharb »

i took the pics with my phone its a 2 mp camera, i'm hoping the original pics are big enough. i can send them to your email if you want me to, it'd be easier than posting them on another website, and stop apologizing about ur english, its pretty good, and u spell better than most ppl i know.
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Post by Hood-R Oliver »

Ok, i just personly think that it's easier to host them to imageshack.us , cause sometimes the pics might b to big to email, but i can send u my email by a pm if u prefer useing email?

And pics of that bodykit and spoiler that im needing don't have to b so big and good quality, cause i can rebrush those parts but the tail lights, civic projektors and the newer dash r to difficult to brush so i have to cp them so they should b as goog and big as possible.

The pics that i'm editing r took with a 5.3 megapixel digicamera and the resolution is 2608x1952.

And my english used to b better cause i haven't used it a lot anymore.

And i might post the pics when i get them done, but i'm trying to make the car look like what mine is going to look like, so i have some problems and i get new ideas every day. I'm only going to b 15 in january and i'll get my drivers licence when i'm 18 so it will take quite a long time to get it done but i might post some w.i.p pics here.

At the moment the car is lowered, 18" rims (17 in the stock pic), mazda logo and indicator shaved, z3 style went and bad boy bonnet. I haven't started the rear pic yet. :wink:
But i'll start it when i get some pics of the parts i need.
Mx-3 enthusiast since 2004.
Hood-R Oliver
Regular Member
Posts: 59
Joined: November 8th, 2006, 1:06 pm
Location: Kouvola, Finland

Post by Hood-R Oliver »

I know this is quite old and sorry for double-post but i still need pics! hharb was friendly enough (<- is it speled like that?) to send me some pics but i could only fit one of the taillights :( . I can't find good donnor-pics (pics that u take parts to use in your chop) so i'm asking u for some and i know there r many mx-3s on this forum with the parts i need. I'll post some w.i.p pics later cause i'm having some problems with rims an tires. Mostly my only problems r finding donnors.

so heres what i need:
front bumper: http://pakfeifertuning.com/store/popup_ ... hp/pID/270?
rear bumper: http://pakfeifertuning.com/store/popup_ ... 81ba1014d3

and gtr style spoiler.
^^ these parts dont' have to b so big and good quality cause i can brush them.

i also need pics of civic-projektors, and altezza taillights (carbon), and newer dash. These pics SHOULD BE AS BIG AND AS GOOD QULITY AS POSSIBLE! it's a waste sending me s--- pics!

When u r taking pics of your car make sure it's in these perspectives/angles:
Image
Image

A good tip is to print these pics and take them there were u r taking pictures so u can see the angles etc. Please read more in my other posts im too tired to write everything again into this post! Oh, i'd also really like some pics of lambo-doors on the mx mut i guess not so many of u have them...
Mx-3 enthusiast since 2004.
Post Reply

Return to “General Mazda MX-3”