Page 1 of 1
HEI On OBDII?
Posted: October 23rd, 2006, 3:31 pm
by Nd4SpdSe
Posting ou of curiousity and for another Mx-3 member, but is the HEI mod doable on an OBDII Mx-3, and even then, on the newer OBDI models (94-95) is there a difference in the disty wiring for the HEI mod?
Posted: October 23rd, 2006, 7:56 pm
by max kl
i no for shure the distrubtor is diffrent if you like i will look it up at my shop and see how diffrent it is.
Posted: October 23rd, 2006, 9:28 pm
by mx3autozam
yes it can be done on OBDII if you look on Probetralk its on there somewhere. Its not much different than the other one.
John
Posted: October 25th, 2006, 3:01 pm
by max kl
it depends on if you have 3 wires going to your coil. if you do than the mod is almost the same. if you only have 2 wires in the 3 pin conncctor than unplug it and check for 3 pins in the coil. if there are 3 than you will have to install the 3rd connector pin.