who is this cool guy

V6 Technical/Performance Discussions
Post Reply
User avatar
PWRD_BY_HKS
Regular Member
Posts: 696
Joined: August 11th, 2004, 2:01 am
Location: El Paso

who is this cool guy

Post by PWRD_BY_HKS »

jdmx-3 KID OF THE Image
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Post by Custommx3 »

No, and someone else bought his rolling chasis I believe.
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

Yup DRAG323 has bought the shell and installed his mechanic in it. Eric (car owner) and local guy over here has done way better times than Dave did with the mx. It was fun seeing Dave's new car (protege ?)competing against Eric's mx-3 at a local dragway
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

So who did better, Dave or Eric?
Dave is a super old school MX-3er. He was quite the tuner in his day. Of course the MX's capacity for speed helped him alot. ;)
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

can't remember since it was a while back but I "think" dave was ahead not by far. I'll try to find the video
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Post Reply

Return to “V6 Technical/Performance”