What size of wheels can I fit on stock Mx3?
Posted: September 30th, 2006, 12:03 am
Size? Height? Offset? What is a good size tire on a stock or what do you suggest?
MX-3.com
The Worlds First and Largest Mazda MX-3 Forums
https://mx-3.com/phpbb3/
What size of wheels can I fit on stock Mx3?
Page 1 of 1
Posted: September 30th, 2006, 12:36 am
A good size for the GS is 205/55/15, a RS is like 195/60/15 I believe. Those two sizes are fine for a mx3. As for offset, +40, +42 and +44 are fine. If you are getting rims then go for 16's or 17's.
Posted: September 30th, 2006, 2:01 am
3x posting is pointless. Ohters have been deleted. You have been warned
Posted: October 4th, 2006, 3:37 pm
Do 195/60/15 actually fit? Here are the stats:
Stock Tire - 185/65R14
Speedometer Difference: -
Diameter Difference: -
Tire 1 - 205/55R15
Speedometer Difference: 1.755% too slow
Diameter Difference: 1.72%
Tire 2 - 195/60R15
Speedometer Difference: 3.201% too slow
Diameter Difference: 3.1%
Stock Tire - 185/65R14
Speedometer Difference: -
Diameter Difference: -
Tire 1 - 205/55R15
Speedometer Difference: 1.755% too slow
Diameter Difference: 1.72%
Tire 2 - 195/60R15
Speedometer Difference: 3.201% too slow
Diameter Difference: 3.1%
Posted: October 4th, 2006, 7:11 pm
Why wouldnt they fit? There only like a 1/8 of a inch larger. mx3's have like a 6 inch wheel gap. I had that size on my lowered mx.
Posted: October 5th, 2006, 5:28 pm
15s look good on my lowered car. I have heard the others say 16 or 17". i like to have something available if there is a blowout in small vill USA.
Posted: October 8th, 2006, 3:22 am
60, 55 for sidewall?????
YUCK. you don't deserve rims!
(it's all about 40 sidewalls)
(sidewall size is the middle number of the three in tire codes. 45 or forty, don't be dorky)
YUCK. you don't deserve rims!
(it's all about 40 sidewalls)
(sidewall size is the middle number of the three in tire codes. 45 or forty, don't be dorky)
Posted: October 9th, 2006, 8:21 pm
thanks guys. I'm looking for 16's but may take 15's if the price is right. What distance have you guys lowered your guys? I was thinking 2 inches but would you recommend different?
Posted: October 10th, 2006, 12:22 am
What are you talking about man? I was talking about stock 15's, don't tell me you are running 40 or 45 series on your 15's lol. If you ran 16's or 17's then go ahead and get your pinner sidewall tires. BTW, Who doesn't deserve rims?illapino wrote:60, 55 for sidewall?????
YUCK. you don't deserve rims!
(it's all about 40 sidewalls)
(sidewall size is the middle number of the three in tire codes. 45 or forty, don't be dorky)
Posted: October 10th, 2006, 11:14 pm
I may get a set of 17's. Do you think I'll need to lower it with 17's on there? It seems like those might barely fit.
Posted: October 11th, 2006, 12:01 am
They will fit fine man, I suggest you lower it as there is going to be a massive wheel gap there. Think about this, If you are getting a bigger rim, you are basically sacrificing your tire size at the same time, so in reality a 17" rim with tires will not be much (if at all, depending on your tire size) that much bigger then what you have now.
As for tires, try running a 205/45/17 or a 215/40/17, those are good sizes.
As for tires, try running a 205/45/17 or a 215/40/17, those are good sizes.