[FS] Babyblue's left overs.
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
[FS] Babyblue's left overs.
Ok guys I would like to thanks you all for buying lots of part from me
Now this is what I got left !
All prices are plus shipping and are in candian dollar, you can pay me by paypal or money order.
*Complete klze bottom end minus oil pump : 100$ pick up only
--no pics--
*Toga Hi-Volume oil pump, used for around 1000km, still looks new, modded for underdrive pulley but works without one too : 70$
--no pics--
*rear only klze head, no cam caps, no hla's if picking up I can give the other one for free (damaged): 50$
--no pics--
*Suspension techniques coils, 1.3F/R, used for 2 summers, nice soft drop : 150$
--no pics--
SOLD
*camber bolts (set of 2) for guys that are drop that nees a little camber adjustement : 10$
*stock gs 15" honeycom wheels (8 in total), rubbers on it but no good : 25$ each wheels (pick up only)
*gs radiator, works fine : 40$
--no pics--
*Gs alternator, works good : 40$
SOLD
*Gs starter, rebuilt 5000km ago : 40$
*Blue, black and chrome steering wheel. Comes with a momo hub.
50$ takes it home (hub is worth around 35$) OBO
http://img.photobucket.com/albums/v311/ ... terior.jpg
SOLD
*Momo crystal clear shifter : 20$ OBO
http://img.photobucket.com/albums/v311/ ... _booth.jpg
2.5 Stainless steel flex pipe around 12" long, good for a custom exhaust, *brand new. 20$ OBO
--no pics.--
SOLD
*Stock Gs spoiler, in good condition: 30$ OBO
--pics coming--
*Stock headlights, really nice finish, no yellow on them. 50$
no pics sorry.
SOLD
*Stock sunroof assembly w/ motor: 40$
jams a little when you open it and retract.
*Whiper arms (under the cowl) with motor or apart: Best offer
*misc stuff, ask for them, I got every hose, bolt, pumps, sensors (no o2's), you name it.
shoot me a pm or ask here.
I'll add more as I clean the garage.
Now this is what I got left !
All prices are plus shipping and are in candian dollar, you can pay me by paypal or money order.
*Complete klze bottom end minus oil pump : 100$ pick up only
--no pics--
*Toga Hi-Volume oil pump, used for around 1000km, still looks new, modded for underdrive pulley but works without one too : 70$
--no pics--
*rear only klze head, no cam caps, no hla's if picking up I can give the other one for free (damaged): 50$
--no pics--
*Suspension techniques coils, 1.3F/R, used for 2 summers, nice soft drop : 150$
--no pics--
SOLD
*camber bolts (set of 2) for guys that are drop that nees a little camber adjustement : 10$
*stock gs 15" honeycom wheels (8 in total), rubbers on it but no good : 25$ each wheels (pick up only)
*gs radiator, works fine : 40$
--no pics--
*Gs alternator, works good : 40$
SOLD
*Gs starter, rebuilt 5000km ago : 40$
*Blue, black and chrome steering wheel. Comes with a momo hub.
50$ takes it home (hub is worth around 35$) OBO
http://img.photobucket.com/albums/v311/ ... terior.jpg
SOLD
*Momo crystal clear shifter : 20$ OBO
http://img.photobucket.com/albums/v311/ ... _booth.jpg
2.5 Stainless steel flex pipe around 12" long, good for a custom exhaust, *brand new. 20$ OBO
--no pics.--
SOLD
*Stock Gs spoiler, in good condition: 30$ OBO
--pics coming--
*Stock headlights, really nice finish, no yellow on them. 50$
no pics sorry.
SOLD
*Stock sunroof assembly w/ motor: 40$
jams a little when you open it and retract.
*Whiper arms (under the cowl) with motor or apart: Best offer
*misc stuff, ask for them, I got every hose, bolt, pumps, sensors (no o2's), you name it.
shoot me a pm or ask here.
I'll add more as I clean the garage.
Last edited by babyblueMX3 on June 3rd, 2006, 11:10 am, edited 2 times in total.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
duuuude PLEASE sell me the cable connector to the transmission speedo sensor i cant find it.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
lol alright Hec, one of the 2 wiring going to the tranny was friend (close to exhaust piping) so I'll see if it's the one that is friend, wich one is it again ? I am confused with the reverse and speedo sensor.hgallegos915 wrote:duuuude PLEASE sell me the cable connector to the transmission speedo sensor i cant find it.
chris right ? I'll try to get some asap.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
The speedo one is trhe one thawt goes to the TOP where you fill the transmission from. I need both ends well NOT the sensor's end just the one from the harness side... dam am i making sense? LOL basically when u disconnect thesensor.. a male plug is left. I need the male part of the connector.
Um..
i confuse myself :OP
its the one where you connect the speedo sensor to but i dont need speedo sensor (tranny fill)
Um..
i confuse myself :OP
its the one where you connect the speedo sensor to but i dont need speedo sensor (tranny fill)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Supporting Member
- Posts: 425
- Joined: June 2nd, 2002, 2:01 am
- Location: PA
Do you have an AC condensor that is good. A rock broke mine open
93 GS-DE,mx6 tranny, obx 2nd gen headers, highflow cat n 2.25" catback, 65mm tb,CAI, mazdaspeed mounts, SPEC Stage I clutch kit, new K8 flywheel, SRD C.A.B., Intrax, S.T. braces
http://www.cardomain.com/memberpage/698108
http://www.cardomain.com/memberpage/698108
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
I'll see what I can do and I'll get back to you.hgallegos915 wrote:The speedo one is trhe one thawt goes to the TOP where you fill the transmission from. I need both ends well NOT the sensor's end just the one from the harness side... dam am i making sense? LOL basically when u disconnect thesensor.. a male plug is left. I need the male part of the connector.
Um..
i confuse myself :OP
its the one where you connect the speedo sensor to but i dont need speedo sensor (tranny fill)
no a/c sorryschuttie2002 wrote:Do you have an AC condensor that is good. A rock broke mine open
I got a buddy who wants them but not sure if he'll take em. I'll let you knowDeimos wrote:do you still have your motor mounts? (stock or filled)
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
I probably have them. I just have to find themFocal wrote:do you have the V6 alternator mounting bolt?
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
OK I think I have the right connector. the sensor that is on top of the tranny more to the rear. I took it out and you want the other end of that part of the harness right ?hgallegos915 wrote:The speedo one is trhe one thawt goes to the TOP where you fill the transmission from. I need both ends well NOT the sensor's end just the one from the harness side... dam am i making sense? LOL basically when u disconnect thesensor.. a male plug is left. I need the male part of the connector.
Um..
i confuse myself :OP
its the one where you connect the speedo sensor to but i dont need speedo sensor (tranny fill)
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)