Page 1 of 1
auto to manual WIRING
Posted: April 9th, 2006, 10:08 pm
by wagZE
did the ze swap, auto to manual swap.. the car wont start now. i saw two empty female wire connectors on the clutch side of the pedal assembly. where can i find the wires to ceonnect into them they werent on the automatic pedal assembly. i used the mx6 auto to manual swap instructions and they mentioned "tricking" the computer through a wire connector near the tranny. i didnt see it. thanks in advance for your help
Posted: April 9th, 2006, 11:54 pm
by atlantamx3
Find this pair of connectors:
And Wire the white connector like this:
And VOILA! It will crank right up.
Let me know if you have any more questions
Posted: April 10th, 2006, 5:10 pm
by wagZE
alright cool, but what do i do with the black connector you just said find it. thanks!
Posted: April 11th, 2006, 2:54 am
by atlantamx3
nothing. it is attached to the white one... so its easy to spot.
Posted: April 11th, 2006, 4:27 pm
by wagZE
![Very Happy :D](./images/smilies/icon_biggrin.gif)
VROOM VROOM!!!!!!