Page 1 of 1
CAI Vibrant
Posted: January 16th, 2006, 4:28 am
by Gorlm2
Can i use Vibrant CAI kit for Acura Integra (90-93) #2207 ?
I can order cai just from catalogs.
Thanks
Re: CAI Vibrant
Posted: January 16th, 2006, 6:07 am
by jschrauwen
Gorlm2 wrote:Can i use Vibrant CAI kit for Acura Integra (90-93) #2207 ? I can order cai just from catalogs.
Thanks
Attach a pic of the item you're describing and someone should be able to recognize if it will work. Most of use buy it from ebay because it is so much cheaper there.
Posted: January 16th, 2006, 6:21 am
by Gorlm2
It is the problem. I don't have any picture, so i'm asking you
I'm from Russia? so i can't use Ebay.
Posted: January 16th, 2006, 1:43 pm
by Talon_66
Yes, you can use it
Posted: January 16th, 2006, 3:10 pm
by jschrauwen
Gorlm2 wrote:It is the problem. I don't have any picture, so i'm asking you
I'm from Russia? so i can't use Ebay.
OK, plan "B". Hopefully this CAI is in an electronic catalogue and if so, just attach a link to that catalogue page so that we can go from there.
Re: CAI Vibrant
Posted: January 16th, 2006, 3:58 pm
by JWMX3
Gorlm2 wrote:Can i use Vibrant CAI kit for Acura Integra (90-93) #2207 ?
I can order cai just from catalogs.
Thanks
yes, that one is the most common, also 90-93 accord works, either way you have to be prepared to cut it up to fit
Posted: January 16th, 2006, 5:18 pm
by MX3 GSR for dummies
You order the CAI for the fancy piping, thats all. You'll have to cut and fabricate the intake by using sleeves you can find to fit the TB to the piping and put our MAF midway. You would also have to choose a filter for the end. Total pieces would include 1 acura (I used a 92) intake pipe cut in half. 2.5 to 3" sleeve for TB and a 3" sleeve to transfer from pipe to MAF on filter side. Direct fit the pipe onto the MAF on TB side. You also need 5 ring clips to attach and hold parts together. A mounting bracket from engine to the intake is necessary to hold and support the intake so it moves with engine. PM me if you want pics to get a visual.
Posted: January 16th, 2006, 5:28 pm
by Nd4SpdSe
MX3 GSR for dummies wrote:You order the CAI for the fancy piping, thats all. You'll have to cut and fabricate the intake by using sleeves you can find to fit the TB to the piping and put our MAF midway. You would also have to choose a filter for the end. Total pieces would include 1 acura (I used a 92) intake pipe cut in half. 2.5 to 3" sleeve for TB and a 3" sleeve to transfer from pipe to MAF on filter side. Direct fit the pipe onto the MAF on TB side. You also need 5 ring clips to attach and hold parts together. A mounting bracket from engine to the intake is necessary to hold and support the intake so it moves with engine. PM me if you want pics to get a visual.
Just to be picky, it's a VAF, nota a MAF.
Posted: January 16th, 2006, 5:30 pm
by MX3 GSR for dummies
LOL....I didn't even realize.
Posted: January 17th, 2006, 1:28 am
by Gorlm2
jschrauwen wrote:Gorlm2 wrote:It is the problem. I don't have any picture, so i'm asking you
I'm from Russia? so i can't use Ebay.
OK, plan "B". Hopefully this CAI is in an electronic catalogue and if so, just attach a link to that catalogue page so that we can go from there.
The link to the catalog is
http://www.vibrantperformance.com/produ ... g42-43.pdf
but there are no any pics for this model.
One more question, what size of adapters for both sides of VAF (difficult sentence
)