Interior panels question
- MX3parkerGS
- Regular Member
- Posts: 65
- Joined: July 27th, 2004, 2:01 am
- Location: St.Joseph, MO
Interior panels question
okay i have a 93 GS and most of you would probably agree that the door panels and seats and whatnot are UGLY!!!!!! with that mixuture of blue, green, purple, and orange and whatever other colors are mixed in with that....
anyways, are the SE's the only models that had that greyish inserts on the panels and stuff, or did other models/years as well? if so, which ones?
reason Im asking is because either way im getting rid of it and it would be ALOT cheaper to find some of the stock greyish panels and rear seats rather then getting them professionally redone.
thanks in advanced for anyone with an anwser!
Parker
anyways, are the SE's the only models that had that greyish inserts on the panels and stuff, or did other models/years as well? if so, which ones?
reason Im asking is because either way im getting rid of it and it would be ALOT cheaper to find some of the stock greyish panels and rear seats rather then getting them professionally redone.
thanks in advanced for anyone with an anwser!
Parker
'94 White MX-3 GS. Engine bay empty and waiting for the 2.5DE.
Completly stock, at this time.
Parker
Completly stock, at this time.
Parker
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
From what I know all SEs came with completely black interior. Black vinyl on the doors and black leather on the steering wheel and seats front/back.
I don't know that I've ever seen a stock grey insert on any MX-3.
I don't know that I've ever seen a stock grey insert on any MX-3.
![Image](http://www.patdiesel.atlantamx3.com/MX-3/patdieselsigMX-3.jpg)
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Have you looked on the MX-3.com homepage for year models configuration and layouts? AFAIN, apart from the 93 SE, it seems to be completely arbitrary as far as colour of interior layouts.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- MX3parkerGS
- Regular Member
- Posts: 65
- Joined: July 27th, 2004, 2:01 am
- Location: St.Joseph, MO
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Gro's car, like mine are not SE's. We did the perverbial swap to the black fabric panels. I believe that there were some models that did come in grey fabric. Then there is of course those gnarly black fabric panels that have faded over the years to look greyish.MX3parkerGS wrote:look at Gro's car, the middle insert on the panels are greyish. so i take it they only came like that in SE's?
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- ScooterBovine
- Supporting Member
- Posts: 502
- Joined: May 9th, 2004, 2:01 am
- Location: Blacklick, Ohio
That's what I was thinking. They started out black, but since most of our cars are nearly 10 years old, the ol fade effect has begun, and made them grey!jschrauwen wrote:Gro's car, like mine are not SE's. We did the perverbial swap to the black fabric panels. I believe that there were some models that did come in grey fabric. Then there is of course those gnarly black fabric panels that have faded over the years to look greyish.MX3parkerGS wrote:look at Gro's car, the middle insert on the panels are greyish. so i take it they only came like that in SE's?
![Very Happy :D](./images/smilies/icon_biggrin.gif)
No more MX-3.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
I'm afraid my panels ARE SE's11111jschrauwen wrote:Gro's car, like mine are not SE's. We did the perverbial swap to the black fabric panels. I believe that there were some models that did come in grey fabric. Then there is of course those gnarly black fabric panels that have faded over the years to look greyish.MX3parkerGS wrote:look at Gro's car, the middle insert on the panels are greyish. so i take it they only came like that in SE's?
and mine are 1000% black. If they don't look black, it is probably the photo, but they are indeed very black.
The rear panel on the passneger side has some weird white stains on it which I have no idea what it is...mold? glue? something else?
![Shocked :shock:](./images/smilies/icon_eek.gif)
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
- ScooterBovine
- Supporting Member
- Posts: 502
- Joined: May 9th, 2004, 2:01 am
- Location: Blacklick, Ohio
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact: