Transmission accumulator seals

A forum for discussions regarding the MX-3' transmission. Swap, technical, and troubleshooting info should be placed here.
Post Reply
mx3mikey
Regular Member
Posts: 44
Joined: May 17th, 2005, 1:28 pm
Location: So Cal

Transmission accumulator seals

Post by mx3mikey »

I have a major leak coming from the front transmission accumulator. It is pouring out around the snap ring. I looked up the accumulator asssembly on the main page. Problem is, I need the sizes of the o-rings and seals before I take it apart. This is my daily driver right now. 1993 4cyl auto tranny. Has anybody even done any work on theirs...anyone for a heads up...any info will be more than I know right now.

Thanks guys.
Top
josephpun
Junior Member
Posts: 10
Joined: September 4th, 2005, 10:58 am

lll

Post by josephpun »

llllllllll
Last edited by josephpun on June 29th, 2007, 6:10 pm, edited 1 time in total.
Top
mx3mikey
Regular Member
Posts: 44
Joined: May 17th, 2005, 1:28 pm
Location: So Cal

Post by mx3mikey »

Actually, I bit the bullet. I pulled it apart and rebuilt the accumulator. NOT hard at all. Turned out I had a tiny little rock wedged in pushing the accumulator down and allowing pressurised fluid to bypass the ring and seal.
Top
Post Reply

Return to “Transmissions”