[FS] Cartech (begi) FMU - Rising rate fuel pressure regulato
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
[FS] Cartech (begi) FMU - Rising rate fuel pressure regulato
like the topic says..I got a cartech fmu..it is fully adjustable. Don't have to swap disc like you do on the vortech. Just turn the knob. You can get more info here about rising rate regulator : http://www.cartech.net/fmu2020.htm
I bought this unit 190us$. It's the 2025. Looking to get around 130us or so. I have put around 5000km on it. so it is barely used. it was temporary for me since I am using megasquirt now.
Probably THE greateast or one of the greatest rising rate regulators out there.. You won't see this on ebay.
come with 4 fitting (2-90 degre elbow and 2 barb fitting for stock hose), check valve with little vacuum on it, mounting bracket and the unit itself
you can email me, pm, msn, aol what ever you feel like.
I bought this unit 190us$. It's the 2025. Looking to get around 130us or so. I have put around 5000km on it. so it is barely used. it was temporary for me since I am using megasquirt now.
Probably THE greateast or one of the greatest rising rate regulators out there.. You won't see this on ebay.
come with 4 fitting (2-90 degre elbow and 2 barb fitting for stock hose), check valve with little vacuum on it, mounting bracket and the unit itself
you can email me, pm, msn, aol what ever you feel like.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
sure john..what you'd like to knnow about it ?
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
well if john doesn't go through you can have it.
John: when you think you're going to have an answer about it.. I posted this on many board and many people are interested.
John: when you think you're going to have an answer about it.. I posted this on many board and many people are interested.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Sorry steve, gone all day and just got back from Kennedy commons meet. Yes, I'll take it. Pm me your PayPal addy and I'll pm you my address too. Thanks for waiting!!!!!babyblueMX3 wrote:well if john doesn't go through you can have it.
John: when you think you're going to have an answer about it.. I posted this on many board and many people are interested.
John
sorry guys
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
ding ding ding..we have a winner...John come on down
I noticed I sold it cheap, talked with mxze@7psi and he told me he bought his on ebay for over 200$.
John you're a lucky man.
man not even a day after posted I sold it..
I noticed I sold it cheap, talked with mxze@7psi and he told me he bought his on ebay for over 200$.
John you're a lucky man.
man not even a day after posted I sold it..
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
I got rid of mine because I'm going with 550cc injectors and it's the only way I can control them on going 15-20psi is not reliable on a fmu.Spinkx79 wrote:Um...maybe not.babyblueMX3 wrote:
John you're a lucky man.
Your not gonna need it John, found out today we are gonna have to go MS. So im gonna have to get rid of mine too![]()
Prob the same reason babyblue got rid of his.
why couldn't you use it on a s/c application ? 6-7 psi with millenia injectors and your going to be alright
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
good john, I'll ship asapjschrauwen wrote:Cheque's in the mail Steve.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)