[FS] Just the KLZE Motor and CF hood left!!!!!!!!!!!!!!!!!!!

[bubba_03]

I was rearended this morning by an elderly gentleman going about 70! So my car totally screwed from the back which is cool because all the important things are up front! Im selling the motor complete which means no parting out the IM or the flywheel and clutch. They all come with the motor. The motor and everything on it has only 3761 miles, so less then 4k miles.

Motor:

-Ross Racing Forged Pistons
-MX6 Connecting Rods
-Toga High performance bearings- Rod and Main
-KL31 Heads and valvetrain
-Toga High performance Oil pump
-Modified Oil pick up screen for increase oil pressure to eliminate HLA tick
-New HLAs 31mm
-New Head Gaskets
-New timing belt, water pump, belts, radiator hoses,
-Fidanza Aluminum flywheel
-Clutch Master Stg 1 Clutch
-And probably some other stuff I cant seem to think of right now

Parted out goods up for grabs:
-KL31 ECU
-Complete MSD ignition Setup
-OBX-r Gen 2 Headers
-HIgh Flow cat
-2 Brand New O2 sensors
-Cosmo Racing Fuel Pressure Regulator
-Stainless Steel Clutch line and 4 Red SS Brake lines
-Brembo Cross Drilled and slotted rotors
-GS Radiator
-Taylor 8mm plug wires
-ZEX Full Dry Nitous kit
-Zex Bottle Neck Gauge
-ZEX purge Kit
-Nos Bottle warmer ( Non of the Nitrous equip. has been installed)

-CF Invader Hood
-Real CF door sills
-Agressor front bumper
-Buddy Club 2 Sideskirts never installed
-GSR wing
-Stock GS wing
-Black Power Door panels
-Front and Rear Corksport Strut bars
-Reverse Indiglow Gauges
-Real CF Gauge Overlay
-2 Red R1 Racing Seats
-17" Bronze Rev V2 Rims w/ tires with less then 600 miles on them

And a few other things just PM me with offers and we will go form ther I will post pics ASAP.

here are a few of the pics but I will add more of the rims and car itself

http://www.cardomain.com/memberpage/822201

http://www.cardomain.com/ride/2047275

[dewthis]

you have mail.

[Dali]

k i am very interested in the msd setup, clutch and brake lines, rotors, plug wires, fuel pressure regulator, cf door sills, strut bars, indiglo gauges, email me prices that you are looking for, will also need your paypal account if you have one. oh and the hood, will check how much for shipping, thanks, email me at unclesluggo@shaw.ca

[mitmaks]

how much for brembo rotors, clutch line, brake lines, engine, headers
mitmaks@yahoo.com

[mx3tuner]

how much for the ecu? the kl31 is the one for the ze right?....i forget...and im too lazy to look....

[Bling Bling]

Is the GSR wing damaged from the hit? Send pics and price to me please. I have another member of our club interested in parts from you, maybe a "group discount" would be possible?!?!

[V8KOMX3]

E mail me a price for the motor, hood, ecu, fpr, and strut bars at bigpoppa19@hotmail.com

[fry_81]

headers? how much?

[bubba_03]

headers? 150 + shp

[bubba_03]

Ok guys here are some more pics


http://www.cardomain.com/ride/2047275

[ooELMOoo]

How much do you want for the civic projectors...are they modded or did u mod your car?....call 1st dibs

[bubba_03]

I fitted the passenger side headlight the day before my wreck and didn't have time for the other, so one is moddded and the other still has to be fitted. I'll take 100 shipped for them. Its a big box.

[catalyst]

How about the intake, shipped to 84097?

And if ooELMOoo doesn't end up paying for those headlights I can do it, let me know.

[timpronk]

How much for the air/fuel gauge and shipped to Brantford Ontario Canada?

[jschrauwen]

Please post an asking price for the motor. I like to keep this above board.