Page 1 of 2
Anyone interested in phenolic spacers?
Posted: July 9th, 2005, 1:25 pm
by cjthor
Looking for interest on an intake phenolic spacer. I might be able to have throttle phenolic spacers made as well. Anyone think this is a good idea?
Posted: August 5th, 2005, 2:56 pm
by matt_fulghum
old thread, I know, but I'd be interested in them... I've burnt my hand many a time on the intake manifold. That sucker gets hot. Around how much would they be?
Posted: August 5th, 2005, 3:45 pm
by cjthor
prolyl wont happen....not enough interest.
Posted: August 5th, 2005, 3:46 pm
by Josh
well we have at least 3 people
Posted: August 5th, 2005, 3:49 pm
by mitmaks
depending on price id be interested for something like that for k8
Posted: August 5th, 2005, 4:19 pm
by matt_fulghum
they already make em for the K8
Re: Anyone interested in phenolic spacers?
Posted: August 5th, 2005, 6:51 pm
by sk8erdude28
cjthor wrote:Looking for interest on an intake phenolic spacer. I might be able to have throttle phenolic spacers made as well. Anyone think this is a good idea?
what engine?
Posted: August 5th, 2005, 7:27 pm
by Joey's mx
interested what is the price??
Posted: August 5th, 2005, 8:13 pm
by Josh
cjthor
looks like you have plenty of intrest now, you just asked in the wrong season
. they would be for the B6DE
Posted: August 6th, 2005, 2:06 am
by cjthor
Anyone know how thick the K8 one is?
Posted: August 7th, 2005, 7:43 pm
by Josh
probably like 1/4".
Posted: August 7th, 2005, 10:55 pm
by nos92mx3
Depends on price but id definatley be in on one.
Posted: August 7th, 2005, 11:40 pm
by JWMotorsports
I'd be interested as well. Be carefull not to make them to thick as on the B6 engines your fuel injectors are mounted to the IM on a angle that sprays directly into the top of the valve with a conical spray for optimum fuel/air atomization.
Posted: August 8th, 2005, 1:08 am
by cjthor
JWMotorsports wrote:I'd be interested as well. Be carefull not to make them to thick as on the B6 engines your fuel injectors are mounted to the IM on a angle that sprays directly into the top of the valve with a conical spray for optimum fuel/air atomization.
my injectors are mounted on the head.
Posted: August 8th, 2005, 10:52 am
by Josh
yah mine are too.
cjthor: any update?