How many people want CF scuff plates???
How many people want CF scuff plates???
Im curious as to the response for a CF version of the oem aluminum scuff plates with the mx-3 logo:
Were also starting the cargo cover, That should be available soon.
Thanks.
Were also starting the cargo cover, That should be available soon.
Thanks.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- Kokiriwave
- Regular Member
- Posts: 365
- Joined: February 20th, 2004, 2:01 am
- Location: Washington
- Contact:
cargo cover... I
DASH CF OVERLAY WITH 2 guage inserts....... IIIIIII
DASH CF OVERLAY WITH 2 guage inserts....... IIIIIII
I want MAZDASPEED!
MY WEBSITE:: http://kingmx.net
MY WEBSITE:: http://kingmx.net
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
cf scuff plates...common sense says that theyll be getting scuffed/scratched and will look like s--- after some use unless your car is show car and you take care to get in/out of it
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- Tunes67
- Supporting Member
- Posts: 4708
- Joined: January 27th, 2005, 6:36 pm
- Location: Everett, WA
- Contact:
The cargo cover I might be interested in.. depends on how you price them.. I understand CF process isnt cheap.. But I also dont have a lot of cash
Tunes67
Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body"
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
- Flashpoint2
- Regular Member
- Posts: 816
- Joined: February 15th, 2002, 2:01 am
- Location: Calgary AB - For now.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
i wouldnt mind set of stainless steel ones either
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
-
- Regular Member
- Posts: 457
- Joined: March 13th, 2005, 11:58 pm
- Location: niagara falls, ontario, canada
- neutral
- Supporting Member
- Posts: 1770
- Joined: December 27th, 2004, 10:19 am
- Location: U.S. Mid Atlantic
FWIW, I remember looking hard at bidding on a set of the SS "MX-3" scuff plates 1-2 yrs. ago on ebay. They were not brand new ("lightly used" <1 yr) but I decided against it cuz you could see from certain pic angles that they were marked up with dozens of... scuff marks!...jschrauwen wrote:Me tooFlashpoint2 wrote:I'm not so keen on the CF scuff plates, but I'd sure like to know where to get a set of the metal ones
-Jim
- neverenuff
- Supporting Member
- Posts: 608
- Joined: January 24th, 2002, 2:01 am
- Location: BLACKWOOD N.J.
As many have allready stated above. Were can I get the metal scuff plates? I remember doing a search a couple of years back and as soon as last year for these and I came up empty handed. Please if anyone know or finds out were to get them please let a fellow MXr know. As far as CF scuff plates I agree dnt thing that is realy a wise choice.
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
any chance on whiper cowels? i need one bad and would much rather have that than scuff plates
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
Ok, So the CF scuff plates isnt a hot item afterall
I will look into the cowl, but i have a feeling its harder than we think, or else it would have been done already.
Not sure how its mounted as I have never removed mine. If its straight forward, I'll make it.
Now, the question, What does everyone think is a reasonable price for the Cowl and cargo cover?
This does not mean that the average posted price will be the selling price, but at least I will have somewhere to start. I saw the EBAY bid for $266 US but i highly doubt anyone actually paid that.
Any other CF parts of interest now that we are on the topic? sorry but no bumpers or dash. Too much work and I know not enough people would be purchasing it and it would be quite expensive. I could be wrong though...
I will look into the cowl, but i have a feeling its harder than we think, or else it would have been done already.
Not sure how its mounted as I have never removed mine. If its straight forward, I'll make it.
Now, the question, What does everyone think is a reasonable price for the Cowl and cargo cover?
This does not mean that the average posted price will be the selling price, but at least I will have somewhere to start. I saw the EBAY bid for $266 US but i highly doubt anyone actually paid that.
Any other CF parts of interest now that we are on the topic? sorry but no bumpers or dash. Too much work and I know not enough people would be purchasing it and it would be quite expensive. I could be wrong though...
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com