Page 1 of 1
intercooler front mount
Posted: May 18th, 2005, 9:47 pm
by johnboi85
what dimensions should the intercooler be to accomodate our mx-3 front end? i'm getting a custom one made. thanks
Posted: May 23rd, 2005, 10:09 pm
by ryanlindenberg
bust out the tape measure...it depends on what kind of bumper you have. i have the mazdaspeed one so it ended up being 5.5" tall or something, i can't remember how long it is.
Posted: May 24th, 2005, 5:31 am
by johnboi85
i have the stock bumper with the lip
Posted: May 24th, 2005, 10:58 am
by nos92mx3
i have a johnny race car fmic that i bought off of ebay, and all i had to do was trim the bumper support on either side of the mounting tabs so the tabs fit up inside of the support, and then i fabbed 2 L brackets for either side and it fits very nice.
Btw the intercooler DImensions are 31x6x2.
Posted: May 25th, 2005, 9:48 pm
by johnboi85
thanks!