KLZE QUESTION

Guest · Post by **Guest** » April 27th, 2005, 3:00 pm

I want to do a engine swap i just want to know everything that i need.....I found a site that looks like a good deal can u guys tell me what else i would need to install the engine
Direct bolt in for 92-96 626/MX6/FORD PROBE/MX3.

2497cc DOHC Belt-Driven 2.5L V6.
Horsepower: 200hp.
Torque: 160lbs-ft.
Compression: 10.0:1.

Motor Swap incls Engine, alternator, starter, clutch, flywheel, intake manifold, exhaust manifold, fuel rail, injectors, distributor,.

http://www.jdmenginedepot.com/catalog/p ... ucts_id=58

.Thanks for the Help

Post by **Custommx3** » April 27th, 2005, 3:33 pm

There is an Engine swap FAQ int he v6 performance section that should tell u what u need to know.

And check your PMs..

Blotto · Post by **Blotto** » April 27th, 2005, 4:21 pm

Holy $*^# that is cheap!!! I almost am ready for my engine to blow just so I can do this swap lol!

mazdubber · Post by **mazdubber** » April 27th, 2005, 8:24 pm

Blotto wrote:Holy $*^# that is cheap!!! I almost am ready for my engine to blow just so I can do this swap lol!

Hehe...mine was $750 and I picked it up!!