MX-6 Clutch on a BPT/Protege DOHC tranny/flywheel
Posted: April 24th, 2005, 5:28 pm
Hi,
My Centerforce Dual Friction is not strong enough for my car and I need to change my clutch ASAP.
I know Marlon is using an MX-6 Clutch kit from ACT, but he told me to use the pilot bearing and the throw out bearing from the Protege.
But when I look on ACT website, the MX-6 bearings has the SAME part numbers than the Protege bearings.
So, I am wondering if I can order an MX-6 clutch kit and use those bearings or if I really need to look out for the protege bearings?
Anyone know that?
If you check out the differences between the 2 kits, it is only the Pressure plate and the alignement tool.
mx6 clutch kit : Z62-HDSS Clutch Kit
Kit Components
Pressure Plate: MZ-015 - Heavy Duty Pressure Plate
Disc: MZSD056S - Performance Street Disc
Release Bearing: RB091
Pilot Bearing: PB1005
Alignment Tool: AT05
Protege clutch kit : ZP2-HDSS Clutch Kit
Kit Components
Pressure Plate: MZ-020 - Heavy Duty Pressure Plate
Disc: MZSD056S - Performance Street Disc
Release Bearing: RB091
Pilot Bearing: PB1005
Alignment Tool: AT20
Anyone can tell me if I get the MX-6 clutch kit, if I can keep the bearings comming with the kit? (They have the same part number!) Any infos would be greatly appreciated!
Thanks!
My Centerforce Dual Friction is not strong enough for my car and I need to change my clutch ASAP.
I know Marlon is using an MX-6 Clutch kit from ACT, but he told me to use the pilot bearing and the throw out bearing from the Protege.
But when I look on ACT website, the MX-6 bearings has the SAME part numbers than the Protege bearings.
So, I am wondering if I can order an MX-6 clutch kit and use those bearings or if I really need to look out for the protege bearings?
Anyone know that?
If you check out the differences between the 2 kits, it is only the Pressure plate and the alignement tool.
mx6 clutch kit : Z62-HDSS Clutch Kit
Kit Components
Pressure Plate: MZ-015 - Heavy Duty Pressure Plate
Disc: MZSD056S - Performance Street Disc
Release Bearing: RB091
Pilot Bearing: PB1005
Alignment Tool: AT05
Protege clutch kit : ZP2-HDSS Clutch Kit
Kit Components
Pressure Plate: MZ-020 - Heavy Duty Pressure Plate
Disc: MZSD056S - Performance Street Disc
Release Bearing: RB091
Pilot Bearing: PB1005
Alignment Tool: AT20
Anyone can tell me if I get the MX-6 clutch kit, if I can keep the bearings comming with the kit? (They have the same part number!) Any infos would be greatly appreciated!
Thanks!