Page 1 of 1
Which intake will work the best with the BP
Posted: March 28th, 2005, 2:41 pm
by Typhoonk
Was looking at these two intakes that are on ebay. Need a intake that has the idle air tube and the crank case tube on it.
Was wondering if anyone with a BP used one of these intakes, and 1. how easy it was to put it, 2. and does it have all the tube attachments
http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=38634
or
http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=38634
Posted: March 28th, 2005, 3:15 pm
by matt_fulghum
aren't they exactly the same thing? XD
Posted: March 28th, 2005, 3:48 pm
by Typhoonk
ones got the black right angle peice, and the other one is aluminum. Kinda wondering which one is not gonna get in the way of the distributor
intakes
Posted: March 29th, 2005, 12:41 am
by krishna
id go with the first one... because of where the valve holes are on it... easier to maintaine and it looks like more aero dynamic
Posted: April 6th, 2005, 1:17 am
by Cpl_Bryant
I had the 2nd one in my 93 SOHC for a while. Not crazy about it. Its out now. Sucked too much water, the spark plug wires were arcing to the metal as well. Not cool. I'd go with the 1st one.
Posted: April 6th, 2005, 1:43 am
by 93SOHC
I have the 2nd one in my 93SOHC, and it is pretty crappy. The fit was bad and the MAF adaptor was a total POS! I am gonna use it whem I do my swap, but it will be greatly modified. If I was You i'd go for the first one, I wish I woulda seen that one when I got my crappy intake!