Page 1 of 2
got my block from the shop today
Posted: March 17th, 2005, 8:48 pm
by babyblueMX3
there you go..I've been waiting for a long time now for this..this is my bottom end all built for boost
this is what's in it :
Aluminum block bored 0.020" over
8.7 CR Wiseco 4340 forged pistons
Wiseco plasmamoly rings
Wiseco floating wrist pins
Wiseco Spiral-lox
Scat forged I-beam rods (magnaflux and shotpeened)
ARP rod bolts
Polished and balanced forged crankshaft
Clevite 0.060 302 undersized rod bearings
Toga High-performance main bearings
Entire assembly balanced
Posted: March 17th, 2005, 8:50 pm
by Chasing_Size
If that were a girl id marry it
Posted: March 17th, 2005, 8:52 pm
by babyblueMX3
ROFL
Posted: March 17th, 2005, 9:05 pm
by mitmaks
area all k-series have same design as honda block, hollow around cylinders.
Posted: March 17th, 2005, 9:28 pm
by jschrauwen
Chasing_Size wrote:If that were a girl id marry it
LMAO 
You can always curl up to those "new seats"........LOL
Posted: March 17th, 2005, 9:32 pm
by jschrauwen
Oh BTW Blue, very nice work. Looks like the outside of the cases were bead blasted? If so, how do plan on tryin' to keep em' perty? So this is some serious turbo project, just the ticket for tearin' up the hills and park in Gatineau. Looking forward to seeing the Blue machine in May when the Toronto area gang goes to Ottawa, if it's ready. Is that the ZE block?
Posted: March 17th, 2005, 9:38 pm
by babyblueMX3
well yeah it was a ZE block but DE or ZE it's the same block anyways :p
the heads are different though
Posted: March 17th, 2005, 10:12 pm
by Zoso124
Looks good, how much boost you planning on?
Posted: March 17th, 2005, 11:05 pm
by papa roached
i hate you
Posted: March 18th, 2005, 12:28 am
by PATDIESEL
Darn perty, but why didn't you knife edge the crank? Not that I'm sayin it isn't BAD-AS$ allready. What was the cost if you don't mind, I know you've said before, but just too lazy to search it.
Can't wait to do that myself, course in five years or so when the wife gets out of law school.
Posted: March 18th, 2005, 4:34 am
by zilva
papa roached wrote:i hate you
LOL
Posted: March 18th, 2005, 5:02 am
by Steeb
must be planning on a lot of boost if you are down to 8.7:1cr much to low for my taste even for turbo unless u are running very high boost on a sc
Posted: March 18th, 2005, 8:23 am
by fry_81
I'm too jealous to give a compliment right now lol.
Posted: March 18th, 2005, 8:37 am
by babyblueMX3
as for boost I'll run 15psi daily and around 20 at the track...all of that manage on Megasquirt and spark...
Thanks for the comments guys
Posted: March 18th, 2005, 12:13 pm
by GoT_DaT_Mx3_Se
If that were a girl id marry it
if that were a man, id marry it!!
