Page 1 of 1
Desktop Dyno?
Posted: January 16th, 2005, 3:53 pm
by projectmx
I have the desktop dyno program and i want to get all the settings for the stock dohc engine so i can look at some possibilities for various setups... but i dont know where to find the info i need and was hoping someone might know where to look or might know some of the specs i am looking for...
Bore: 3.07 in.
Stroke: 3.28 in.
Intake valve: ? in.
Exhaust Valve: ? in.
Compression ratio: 9:1
Induction flow: ? cfm
Manifold Type:
Cam specs:
any helpful posts will be very much appreciated
Posted: January 16th, 2005, 4:57 pm
by Ruben MX-3
alrite buddy... i'll help u with wut i can
Cuz i know how hard it is to find help on these forums! LOL
here you go...
Bore x Stroke (mm) [in]: (78.0 x 83.6) [3.07 x 3.29]
I'll give u more info later man i gotta run out.
Peace
Posted: January 17th, 2005, 8:17 am
by projectmx
thanks.. and if anyone wants to know i did use the search option... if we can get all this info it should go under 4 cyl FAQ cause that is good info to have
Posted: January 20th, 2005, 1:09 pm
by Franko
Where did you get that program from? I want it..
Posted: January 20th, 2005, 2:20 pm
by projectmx
if it isn't too big i can probably email it to people...
.... doesn't anyone know any more of the specs i need to run the program correctly?
Posted: January 20th, 2005, 2:40 pm
by Joey's mx
cam specs are 236 duration!! not sure on the lift!!! It would be nice to have the program!!
Posted: January 20th, 2005, 6:58 pm
by Typhoonk
hook me up with the program if you can!!
weirk@hotmail.com
Posted: January 20th, 2005, 7:36 pm
by Joey's mx
what do you mean by valve ? in?? Stem diameter or stem to guide clearance?? Let me know i can tell you both!!
Posted: January 24th, 2005, 9:47 pm
by mazda20
I can host it on my FTP server if you guys want?
Posted: January 25th, 2005, 11:35 am
by white94mx3
yeah, post it up, it would be a nice little tool to use with all the tuning I do
