![Smile :)](./images/smilies/icon_smile.gif)
Fiberglassing somebody got a good link?
Fiberglassing somebody got a good link?
Okay i want to do a bit of fiberglassing,and there was a great link on here a while ago i just cant find it anymore ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Fiberglassing somebody got a good link?
When in doubt, google it.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Re: Fiberglassing somebody got a good link?
As i said i have searched allso on google,but nothing usable comes up that i were able to find
Anybody else?
![Sad :(](./images/smilies/icon_sad.gif)
Anybody else?
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
Re: Fiberglassing somebody got a good link?
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: Fiberglassing somebody got a good link?
Here's one: http://web.njit.edu/~cas1383/proj/main/
If you want any more help, try asking at http://www.carsound.com/UBB/ultimatebb.php
at the Fabrication Forum.
I used to have pics of my A-pillar build up on Geocities, but can't seem to find it anymore. Looks like they're making you pay for Geocities now.![Mad :mad:](./images/smilies/icon_mad.gif)
If you want any more help, try asking at http://www.carsound.com/UBB/ultimatebb.php
at the Fabrication Forum.
I used to have pics of my A-pillar build up on Geocities, but can't seem to find it anymore. Looks like they're making you pay for Geocities now.
![Mad :mad:](./images/smilies/icon_mad.gif)
Re: Fiberglassing somebody got a good link?
So who are you going to be fiberglassing?
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
Re: Fiberglassing somebody got a good link?
Thanks you guys,Talon i have to read through the treads to see if theres some good info in it
And Lakersfan thanks did you know it was that guy's How to i was talking about? Found it on here some time ago,but simply couldent find it anymore![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Smile :)](./images/smilies/icon_smile.gif)
And Lakersfan thanks did you know it was that guy's How to i was talking about? Found it on here some time ago,but simply couldent find it anymore
![Very Happy :D](./images/smilies/icon_biggrin.gif)
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
Re: Fiberglassing somebody got a good link?
How to Fiberglass a sub enclosure
Another good how to.
<small>[ September 26, 2004, 04:45 AM: Message edited by: Talon_66 ]</small>
Another good how to.
<small>[ September 26, 2004, 04:45 AM: Message edited by: Talon_66 ]</small>
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
Re: Fiberglassing somebody got a good link?
http://chris.pfharlock.com/glass/index.htm
I believe this is the one you looking for.
I believe this is the one you looking for.
If not broke - don't fix, modify. If broke - fix it right, and make it better.
Re: Fiberglassing somebody got a good link?
Thanks you guys your posting some of the same links but theyre all good ![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: Fiberglassing somebody got a good link?
hmm you think making a fiber glass hood would be hard?? i have heard and seen people with fiber glass oods, one foiled up his original hood...layed the fiber glass and resin on top and somehow made a replica of his hood...any ideas on that? what if i was to be able to make these... anyone would be interested?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- fry_81
- Regular Member
- Posts: 1898
- Joined: April 22nd, 2004, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
Re: Fiberglassing somebody got a good link?
it wouldnt be that hard to make, but if you have never done fiberglassing, attempt much smaller projects first. id be interested in it, if it wasnt an oem style, like a scoop or something incorporated into it?
1994 5spd GS Parts Car For Sale 800obo. e-mail for details. fry_81@hotmail.com
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: Fiberglassing somebody got a good link?
oh its because there is this place in mexico where they make copies of body kits and fiber glass hoods. I think the hoods cost around 100 dlls or less..thats why i was asking. It be nice to have one
since i cant really afford the 400 and up carbon fiber one hehe
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!