This would be a nice replacement for my mx3
http://www.teammeguiars.com/vcar_popup.asp?id=4014&iid=25403
97' TSi AWD started its life just like any other Talon. But has transformed into an 11.3@126 honda killing machine.
One of these maybe...
-
timpronk
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
One of these maybe...
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: One of these maybe...
A local ran a 10.7@140mph in his Talon 
. Check it out at his shops we site. http://www.tappauto.com/
. Check it out at his shops we site. http://www.tappauto.com/Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
timpronk
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: One of these maybe...
I like the link you posted better than the one I did, so thanks. I would just hang around the shop drooling on stuff if that was on my street.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: One of these maybe...
Ya the shop is ****in nice! If i had money and wanted **** done thats where i'd go. That Talon puts down 620WHP! 
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: One of these maybe...
I heard that the guy Crhis Tapp MADE a car in aluminum...and that he runs 10-11 sec with it..not sure if it's a talon..coulpe of my friends saw it actually...maybe he has more than one
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: One of these maybe...
Those guys know how to do it. I wish I had a shop like that around here.
