Page 1 of 1
Need help for choosing suspensions
Posted: September 16th, 2002, 12:52 pm
by kecco908
I am a owner of 94 MX-3 with 1.6 4cyl. Right now, I am looking for a new set of springs and a new set of strut/shock (seperatily). However, my car has 4W ABS on. It is kinda hard to find such sets which can fit my car with ABS on. So is there anybody can give me some advise? thanks
Re: Need help for choosing suspensions
Posted: September 16th, 2002, 4:53 pm
by jaydog5678
You can use...Eibach, H&R, Ground Control, suspension tech. <P>The only aftermarket struts I know of that you could use would be the Koni's, but they are not a complete assembly, they're inserts. You can adjust them too, but only while the strut is off the car. Kinda shitty [img]shrug.gif"%20border="0[/img]
Re: Need help for choosing suspensions
Posted: September 17th, 2002, 11:11 am
by tk1138
Do a search for ABS. I think there's a post that talks about the nessicary modification to convert most struts to ABS compatible. I think it's drilling a hole, and inserting the bracket from the old strut, but I could be wrong....<P>Good luck