Page 1 of 1
Greddy BOost controler
Posted: July 28th, 2004, 4:40 pm
by philcosta
hello i have a bpt engine with the bp26 ECU
i have installed a greddy profec b spec 2 boost controler
anyone using this and if yess can you give me your settings for low and high boost thanks
Re: Greddy BOost controler
Posted: August 2nd, 2004, 12:08 am
by cjthor
You set it to what you are comfortable with i think. I have my low boost at 7 and high at 14.
Re: Greddy BOost controler
Posted: August 2nd, 2004, 1:43 pm
by philcosta
can you please give me you specific settings
ex:
set
setgain
warning
etc
for low and high
i just dont know how to bring the boost up
thanks
<small>[ August 02, 2004, 12:44 PM: Message edited by: philcosta ]</small>
Re: Greddy BOost controler
Posted: August 7th, 2004, 3:21 pm
by philcosta
bump
Re: Greddy BOost controler
Posted: August 10th, 2004, 12:50 am
by mdavis
get a boost and fuel/air gauge and set it using those - high as high as is safe
Re: Greddy BOost controler
Posted: August 10th, 2004, 4:04 pm
by philcosta
i did i just dont knoe the difference between
gain
set gain
i dont know at what level i should put the warning
peak
etc
i am running low at 7 and high a 14