![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
The mx is FINISHED!
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
The mx is FINISHED!
Today was the day that people will be talking about for a long long time. The bpt swap has finally been completed. The car runs! IT IS ALIVE! I used the apexi safc on the stock computer and it works awesome. Boosting at about 10-11 psi.. it is INSANELY fast! I actually cant believe it. Anyone thinking about getting a bpt, let me tell you this.. it is worth maxing out your credit card for. ![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
![Image](http://i17.tinypic.com/30idc09.jpg)
![Image](http://i17.tinypic.com/30idc09.jpg)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: The mx is FINISHED!
you > all
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 764
- Joined: June 16th, 2002, 2:01 am
Re: The mx is FINISHED!
congrats! ![Driver :driver:](./images/smilies/driver.gif)
![Driver :driver:](./images/smilies/driver.gif)
- Shady469
- Supporting Member
- Posts: 722
- Joined: June 7th, 2001, 2:01 am
- Location: Tha "U"!! (Hoo-ville Va.)
- Contact:
Re: The mx is FINISHED!
good work man! i know you'll been working on this for quite a while. welcome to the brotherhood of boost!!
PS. the BOV makes you as giddy as a little school girl doesn't it? I can just see the big **** eatin grin youve got right about now... congrats again.
pps. Pics?
PS. the BOV makes you as giddy as a little school girl doesn't it? I can just see the big **** eatin grin youve got right about now... congrats again.
pps. Pics?
B6T powered MX-3 - sold
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: The mx is FINISHED!
must.....resist urge.......to get KL03......and boost it......to high hell!
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
Re: The mx is FINISHED!
What do those BPTs run on 10-11psi?? I know what I want my KL03 turbo to run but I've never really seen specs for the BPTs. Just interested.
![Image](http://i221.photobucket.com/albums/dd146/AlBravo83/mybabyatorchardbeach-1-1.jpg)
1993 Teal MX-3 GS- KLZE and other goodies. RIP
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Re: The mx is FINISHED!
I dont have a boost controller and it goes to 10+ psi... I will post pictures soon.. I have a hell of alot so.. And about the bov, I feel like I am not going to be able to stop giggling.. I pulled alongside a rx8 last night and I gave her a little shot to make it blow off. Then when we got to the lights he backed up and was like "what size turbo your runnin man?" I was thinking this guy owns a brand new rx8 and he wants to know about my car!!!
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
![Image](http://i17.tinypic.com/30idc09.jpg)
![Image](http://i17.tinypic.com/30idc09.jpg)
Re: The mx is FINISHED!
Dyno Stats??
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Re: The mx is FINISHED!
Newfoundland = no dyno
One is coming next month though...
One is coming next month though...
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
![Image](http://i17.tinypic.com/30idc09.jpg)
![Image](http://i17.tinypic.com/30idc09.jpg)
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Re: The mx is FINISHED!
I just updated the cardomain site with new pics.. Check it out everyone.. Ill give ya a taste here...
Cardomain Site
<img src="http://images.cardomain.com/member_imag ... 1_full.jpg" alt=" - " />
<small>[ May 26, 2004, 10:07 PM: Message edited by: Franko ]</small>
Cardomain Site
<img src="http://images.cardomain.com/member_imag ... 1_full.jpg" alt=" - " />
<small>[ May 26, 2004, 10:07 PM: Message edited by: Franko ]</small>
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
![Image](http://i17.tinypic.com/30idc09.jpg)
![Image](http://i17.tinypic.com/30idc09.jpg)
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: The mx is FINISHED!
you need a GS lip to cover that under hang a bit :p
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 500
- Joined: April 16th, 2001, 2:01 am
- Location: Lewisville, texas
- Contact:
Re: The mx is FINISHED!
well at the stock boost mine ran about 160hp and 165 tq at the wheels. so at 10-11 id say close to about 190-200 or so at the wheels.give a little bit here and there. i know on the gtr at 11-12 psi i ran 202 and 194 but your turbo since it is smaller will be almost instant boost and your dyno chart will look more like a supercharged dyno than a turbo. the boost is instant. when i had my gtx i couldnt stop smiling for like a month. oh and yes get a gs lip. im looking for a gs front bumper my self to hide my fmic a little better. anyways congrats and make sure everything is up to par before you start upgrading. if you have a little bit of extra money i know corksport has a set of camshafts for the bp that is for a turbo application. 425 isnt too bad. congrats and let people know what the mx-3 is about :p . i know in the 1/8th i ran a 9.5 seconds but could have been closer to a 9.0 flat. 9.5 was at stock boost.
jeremy cline
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!
man iraq sucks!!!
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Re: The mx is FINISHED!
Yeah, I need to get a gs lip thats for sure. It does hang down a little bit but nothing to get too upset about.. I would say that is almost a good complaint.
I love that little turbo man. I find it strange how people get these huge turbos that look like they came off a skyline or something and are only running 5 pounds of boost. I just cant make any sense of it. They would probally be at like 5000 rpm before it would start spooling, There is a dude I know with an integra and he is putting a turbo on it, the turbo is so big that you can almost fit your fist into it. How outrageous.. Bigger isnt always better.![Wink ;)](./images/smilies/icon_wink.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I love that little turbo man. I find it strange how people get these huge turbos that look like they came off a skyline or something and are only running 5 pounds of boost. I just cant make any sense of it. They would probally be at like 5000 rpm before it would start spooling, There is a dude I know with an integra and he is putting a turbo on it, the turbo is so big that you can almost fit your fist into it. How outrageous.. Bigger isnt always better.
![Wink ;)](./images/smilies/icon_wink.gif)
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
![Image](http://i17.tinypic.com/30idc09.jpg)
![Image](http://i17.tinypic.com/30idc09.jpg)
Re: The mx is FINISHED!
Nice job bro ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
95 MX-3 RS, Black, 5 Speed.
Mazda Speed body kit.
17" white ADR "vision" rims.
SONY head unit, speakers, subs, and amp.
Costume CAI, and Exhaust systems.
Mazda Speed body kit.
17" white ADR "vision" rims.
SONY head unit, speakers, subs, and amp.
Costume CAI, and Exhaust systems.