MX-3.com

the new 2003 viper headlights i think would look dope on a mx-3 can someone photoshop them in? and how about headligths that look liekt hem for the projecters?

Just to let you know in case you, or anyone else, is thinking about converting these into the MX-3.....<p>I've held ALL 3 generations of Viper headlights in my hands, and compared them to the MX-3 headlights.<p>The Viper lights are REALLY long and if you put them in they'd almost take up the whole front of your car. They're large, but not tall. VERY deep though.<p>Just an FYI.<p>~A

I noticed that when doing the above image, cut a lot out of the viper lights and had to squash them width wise to create a similar shape to the mx-3 ones.

These might work:<p>

I really shouldnt give this info away, but this is what Im going to use in mine.<p>
2001 Porsche 911 lights. I know I'll have to do alot of modifying, but thats cool w/ me.
Picked them up pretty cheap on ebay.<p>[ June 23, 2003: Message edited by: Custommx3 ]<p>[ June 23, 2003: Message edited by: Custommx3 ]</p>

mx-3uk what kinda car is that do you have the measurements will they fit if you get me a car make and name i can find out for ya<p>
cody
93 still stock but hopefully not for long

the car is the MG MGF and it isnt available here in north america, from other pics I have seen I dont think they would work to well. they dont come over enough(towards the center of the car)although you could always import them from europe, Im positive you can get them in GB, but not sure else where, btw MG is planning to come back into the North American market in 2006 so it will be a while b4 you can easily get those heads over here. hope this helps

Hey barry, any up dates on the projector headlight pods? I was just wondering seeing that you are going to mold some lights into your car instead of using your own creation. But then again those Porsche ones will look bada$$. <p>thanks

Hey Barry, you know that those Porsche 911 lights come with bi-xenon HID projectors too, but I think that they would be too expensive. Would be really cool though.

The MGF is common in the UK, cheap parts!
(http://www.mg-rover.com)

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Custommx3:
I really shouldnt give this info away, but this is what Im going to use in mine.<p>
2001 Porsche 911 lights. I know I'll have to do alot of modifying, but thats cool w/ me.
Picked them up pretty cheap on ebay.<p>[ June 23, 2003: Message edited by: Custommx3 ]<p>[ June 23, 2003: Message edited by: Custommx3 ]<hr></blockquote><p>Whoa that's weird. I bid on a set of those last November and was going to do the same conversion.<p>I ended up re-selling the lights for a 50% profit though.<p>~A