MX-3.com

i went to best buy to check out the system im putting in (they overprice). I met a guy witn an mx3. Naturally we raced only to tie lol. we booth had the 92 1.6L. He painted his interior with normal spray paint! ive heard ur not sypolsed to do that that there is some special stuff, it did look good however, exept for the parts that were chipping (dont think he put on a clear coat) i dono what do u guys say ?

I used rust-0-leum or however you spell it...so far so good, had it done for almost a year...i put a clear coat on it too.

Well you can do it with that Foliatec Interior Spray if you wanna spend 30 bucks a can... <p>But us poor folks do it with regular spraypaint!

walmart is your solution bruda,,,
couple of cans of paint and couple of cans of clearcoat will do the job perfectly,,,,
I heard someone painted it with the car paint!!! wooow, too much money and time to waste,,,

i used Krylon. if u want some good quality it takes soem time. First u gotta do some good sanding. Then clean it with some sort of alcohol or degreaser. then prime it. lots of thin coats of paint, and last but not least a couple coats of clear coat

I did mine with car paint... in a spray paint can. Bought it at canadian tire. Didn't cost much at all. I used barry's method, it worked extremely well.

After sanding a little, I used some adhesive promoter, then some paint specially for vinyl and plastic parts. Well see if it lasts.

Foliatec Interior Spray is worth $30 a can...it's just that good!!

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by polak_gino:
i used Krylon. if u want some good quality it takes soem time. First u gotta do some good sanding. Then clean it with some sort of alcohol or degreaser. then prime it. lots of thin coats of paint, and last but not least a couple coats of clear coat<hr></blockquote><p>I have a how to that explains just that on my website, for those who care to read it.