Everyone peep, I wanna kno wat yur plans are

[sikblue]

Wat r the plans for your car???? Ill do the 1st example..u all do the same, i wanna see what everyones gettin

[sikblue]

Body Work(kit,spoiler,rims)[/b
Pak. Blitz style front,Black widow Sides,Del sol sf back
Z3 fenders-Modern image dual rip tear dein in gunmetal-Concept neeper Fly 17inch rims-Alumium silver spoiler-GUNmetal Altezzas-Celica Gunmetal projectors-Custom Orange metalli paint with black/CF hood-roof scoupe-ORANGE UNDERGLOW<p>Interior
Custom orange-black seats-orange carpet all around
orange n black accents on dash,steering wheel and shifter-Alpine tv screen and another cd player- custom orange/black fiberglassed enclose in hatch for 4 kiker comp vrs(new ones w/orange hehe)and 2 1200 watt kicker amps n caps and separte orange top battery<p>ENGINE
Intercooler-turbo(2yrs later) and re config, a secret motor into the bay)<p>well its quite a wish list but.....<p>AND MY TRUSTY CRIMESTOPPER CS 2006FM ALARM

[992mmx3]

well, my b6t is in the process, next is cut and buff the paint, then roll cage, powder coated to match the car, t3 turbo this summer (ball bearing??), volk racing wheels, Z rated tires, mazdaspeed front, not sure on sidekirts or rear, mazdaspeed struts and h&r lowering springs, aftermarket oil cooler (greddy??) shave antenna and replace with black one, kinda like the vw's and others, redue front seats in leather, white gauge faces to match the autometer ones I have. what a cool topic, I like seeing lists of everyones future mods.

[HRO]

For this Summer ;<p>New body kit i'm working on!<p>New hood<p>Sell existing stereo, get 2 amps/12's<p>Fiberglass entire interior<p>Air Ride Suspension FBSS<p>16 gunmetal rims<p>Plus a few extra's I won't talk about<p>I also want to get this all done for that Ottawa meet, well at least most of it. <p>[ February 04, 2003: Message edited by: mx3vs ]</p>

[jonathanj]

im going to be working on getting some hp from the motor. im shooting for 250- 350. as for looks new hood, possibly rear,and HIDs. Interior i plan to finish my stereo setup, and door panels in carbon fiber.

[markV6]

well i'm a UK owner and workin wi basically a blank sheet!!! So if ya wanna gi me some ideas cos damn some of the rides on here a sweet as fcuk!! but these are my plans:
appearance:
17" rims (already bought!)
Erbuini G-tr rear spolier,
CF hood in black,
altezza rear clusters,
Front and rear bumbers???? (lookin round)
sideskirts(same)
tinted windows,
wide arch kit???? (gotta get on photoshop see how things pan out + way in the future)<p>Ride:
Lowering springs 60mm, uprated struts, sway bars, grooved and vented discs!!!<p>under the hood:
HKS super power flow, super-chip / ECU
(turbo at a later date years!!!)<p>interior:
full leather interior and trim, indiglow dials, personalised carpets, 4 12" subs, 2 amps, 2 components, in dash tv, 2 head rest tv's and one in boot, ps2, dvd(and my porn collection)
Oh and personlised plates<p>If any of you guys can help me... in regards to cheap after market products or shipping it would be appreciated! I hev only had the car 4 weeks and spent 1500 pounds already = $2250 - $2500us. Plus gimme some advice

[marshmallow15]

http://www.geocities.com/driftingboogie/mx3.htm<p>all my plans are right there.

[VizualXTC]

Wow, I usually don't talk to much about my plans, but what the hell right? I've prolly made this list a hundred times, but it changes every time. There is going to take a LOT of time and even more money so don't expect this any time soon....but here's the revised edition.<p>Body/Appearance
New front end (I'm debating on fabricating my own, or just buyin a prefab)
G-Force rear
FX side skirts
Custom vents
Supra or GTR style wing
Neon Underbody kit
CF hood
Black paint w. purple pearl
Custom projector headlights
HID bulb conversion
Custom tail lights
Tint (35% windows, 20% hatch)
Clear corners
Fog lights
Painted calipers and rotor trim
Shaved handles
LED turn signal<p>Wheels/Suspension
Ground Control Coilovers
17" Enkei RS5
Kumho Ecsta Supra 712 205/40ZR-17 80W B
Powerstop cross drilled rotors
SS brake lines
Front and rear strut tower braces
dot 4 fluid<p>Engine
Engine swap (KL03 or KLZE)
Head studs
Eagle Rods
Ross 9.5:1 pistons
T3 (poss. T3/T4) turbo
Tial wastegate
65mm throttle body
Phenolic Spacers
Starion FM Intercooler
2.75" Exhaust w/ Flowmaster 40 muffler
MSD DIS-4 ignition or AEM EMS
NOLOGY HotWires
NOLOGY plugs
Turbo XS Type H or 1G DSM BOV
Injectors
Wahlbro 255LPH fuel pump
ClutchMasters Stage 3 clutch
Short throw shifter
Boost, EGT, A/F, Fuel pressure, and Oil Pressure gauges.
Water Wetter
Redline Transmission Fluid
and Possibly a small shot of N20<p>Interior
Custom black leather seats
Custom a-pillar 3 gauge pod
Custom Gauge Bezel gauge pod
Various neon
Auto dimming rear view w/ compass
4 point harness
Bargain pedals
Custom fiberglass console
Push Button ignition<p>ICE
Onboard computer
5.1 surround sound card
TV/Radio Tuner
glove box mounted CDRW/DVD combo
GPS
7" LCD replacing radio and din cubby
6.4" LCD in headrests
Custom fiberglass sub enclosure (not sure but have an idea)
2 12" Orion HCCA subs
Orion XTR PRO2400D amplifier
4 1-Farad capacitors
5.6" sterio display
center mount speaker<p>ETC.
Driver side door actuator
Heated seats
Power seats<p>Security
Comupstar 2WSS-AS security system w/ doplar radar and paging/arming up to 1.25 miles away.<p>Sure there are things I'm leaving out. If I gave it all away, there would be no mystery. Only the closests of friends know exactly what I am doing.

[zytariuk]

17" Rims / Rubber / Struts / Lowering Springs / GTR Spoiler / Catback Exhaust<p>These are the modifications that i have already purchased and are just sitting on my floor waiting for spring to roll around. This crap alone ran me ~ C$3500.00 ! I too have big plans like VizualXTC, but i don't get myself worked up. Why? Cause i drive like an idiot, so I’ll probably total my car before i get even half way .<p>[ February 05, 2003: Message edited by: zytariuk ]</p>

[VizualXTC]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by zytariuk:
! I too have big plans like VizualXTC, but i don't get myself worked up. Why? Cause i drive like an idiot, so I’ll probably total my car before i get even half way .<hr></blockquote><p>I feel ya. I'll probably do the same thing.....or Iraq will drop a bomb on it.

[Tyler17rose]

Ok well i'm only 17, and only have a part time job so my list is gona be small:<p>-17 inch rims, Konig Tantrum's with Nokian NRH2's
-Ground control coilovers
-ZX2 struts
-Front and back strut bars, ractive
-Custom catback with a Ractive canister style muffler
-PRM Intake
-Momo Jet wheel
-Sparco pedals
-Short throw shifter with new bronzoil bushings. To add to my momo race shift knob.
-RSX leather seats.
-And other painting and carbon fiber work. Like the dash parts. and so on. <p>PS: Maybe later on after i get all that done i'll have enough time to save money and swap in a KLZE To add some go to the show! oh and no ice for me, all i need is intake and exhaust to listen to!

[mattster]

i am 17 as well (almost 18 for anyone who cares). and i am looking at a 4-year college... so you know the funds are very limited. but yeah here we go:<p>- custom catback exhaust 2.25" piping flowmaster 60
- lowering spings (allready purchased)
- Kenwood KDC 719 cd player and infinity 6.5" all around
- 17" focal F5 rims
- maybe a 2.5 KLDE in the future i just saw a totalled probe SE getting towed to a junkyard...<p>its a start

[mx3man83]

hey mattster, a totaled probe SE will do you no good, u need the GT engine...and my plans...hhhmm...well ive got most of what i want already(altezzas, 17's, competition level stereo,intake, exhaust), but i am going to get coilovers, put my touring wing on my GS, and get a new paint job. My paint job isnt bad now but ive got a few dings that are hard to hide since my car is black. If money permits, ill get a klze and body kit..thats about it...

[marshmallow15]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mattster:
- custom catback exhaust 2.25" piping flowmaster 60
- lowering spings (allready purchased)
- Kenwood KDC 719 cd player and infinity 6.5" all around
- 17" focal F5 rims
- maybe a 2.5 KLDE in the future i just saw a totalled probe SE getting towed to a junkyard...
<hr></blockquote><p>i think with that list its very do-able with a 4-year college*not counting the klze*...im doing the same and ive gotten most of that list already on. (not those specific parts)

[Guest]

hmm lets see intall my loweirng springs and struts, Put in 2.5L engine....nice 17"s with some nice low profiles body kit.....and some juice....that about it...hopefully by the end of may )) depending on if I put in my ze or sell it and get a de and if I can find someone to do the install for cheap....