rear wiper arm
Posted: January 14th, 2003, 9:59 pm
my rear wiper arm is lookin' at bit rusty, so i was gonna take it off, clean it up, and paint it... could someone tell me how the hell the thing comes off?! thanks...
Page 1 of 1
Re: rear wiper arm
Posted: January 15th, 2003, 2:59 pm
Did you check the online shop manual ?
Re: rear wiper arm
Posted: January 15th, 2003, 3:38 pm
flip the black cap up that covers the bolt and take the bolt off. Pull hard on the arm to dis-engage the wiper arm from the spindle. 
Re: rear wiper arm
Posted: January 15th, 2003, 3:40 pm
sorry NUT, not bolt. I get my nuts and bolts mixed up.
Re: rear wiper arm
Posted: January 16th, 2003, 12:23 am
mine did the same thing. I sanded them, wrapped the base with masking tape, and put newspaper all over the rear windsheild. Obviously take off the blade. But I was careful and painted it in a couple minutes. I forgot about it till now cause it looks great!
Re: rear wiper arm
Posted: January 16th, 2003, 12:02 pm
thanks alot, i'll do that tonight...
Re: rear wiper arm
Posted: January 16th, 2003, 2:23 pm
get like a flat black rust paint, looks good and lasts forever, i did that with all my wipers when i got the car and it make a huge diff not having rusty wiper arms.