GForce Z3 Fenders

Jutzi420 · Post by **Jutzi420** » November 21st, 2002, 9:42 pm

Does anyone know what the deal is with these fenders? Are they even available yet? I had a bit of an accident recently and I was quoted about 260 for an OEM fender, and I seem to remember someone saying the Z3s were roughly 300 for the pair. If that's true I'd rather just replace both fenders.

kuruption1983 · Post by **kuruption1983** » November 21st, 2002, 11:13 pm

well bro, i would just pick up a fender in a junkyard, take it to the bodyshop and ask em to do M3 or in your case Z3 fenders for me, it would cost alot less eh! 80 or 100 canadian bucks for the fender and 150 or 200 for the job( thats very expensive what i said, thas worst case scenario) and then you would have a sick lookin pair of fenders eh!

momo · Post by **momo** » November 22nd, 2002, 5:10 pm

yes g-force has them

Jutzi420 · Post by **Jutzi420** » November 24th, 2002, 5:42 pm

I think I'm gonna just go with the G-Force fenders. Insurance is payin for it all anyway, and I don't my insurance would cover converting factory fenders.

fictionaldaydream · November 24th, 2002, 6:29 pm

Does anyone live close to gforce. I mean I thought there was. I like to get a pair of z3 fenders if anyone can get them for me.

Guest · Post by **Guest** » November 25th, 2002, 10:16 am

Can anyone link me to g-forces site? Thnk

monty73741 · Post by **monty73741** » November 25th, 2002, 12:37 pm

should be in the appearance faq file or in body kits links on the main page jaosn

mitmaks · Post by **mitmaks** » December 5th, 2002, 4:23 pm

hey guys i want those z3 fenders for my mx too, does anyone know where i can get those or is some company does make em? g-force's site is gforcecustomizing.com but i havent seen it on there thanks guys

marshmallow15 · Post by **marshmallow15** » December 5th, 2002, 5:53 pm

does everyone on this board need to buy mods specifically for their car? why not be creative and by some of the z3 fender vents on teamprototype.com for $99 and have it molded to their oem fender? [img]shrug.gif"%20border="0[/img] it might turn out cheaper than the prices that gforce will charge for their fender and shipping.

mitmaks · Post by **mitmaks** » December 5th, 2002, 7:01 pm

arent they making fiberglass fenders? i heard some company was making them or already did make them, for mx? if not lets get group buy on them guys, i want some bad with z3 vents

momo · Post by **momo** » December 5th, 2002, 7:20 pm

g-force's # is416-769-7071.after the holidays i might be starting a group buy for the new body kit ,the new wing,z-3 fenders,and cf hoods.

fictionaldaydream · December 5th, 2002, 7:40 pm

After the holidays will there be pictures of the new wing, bodykit, and so on.

momo · Post by **momo** » December 5th, 2002, 8:50 pm

the wing will prob be ready for x-mas ,he started on it this week.The body kit mid january.I will keep everyone informed.

HRO · Post by **HRO** » December 5th, 2002, 9:00 pm

momo, A while ago Arnold was talking about making a wing that would go where the stock hatch shade goes. Is this the wing that he is making now? or is he making one for the rear? thanks.

momo · Post by **momo** » December 5th, 2002, 9:19 pm

mx3vs- it's like the one on the civic.He will be using the 95' mx-3 wing (the one that raps around ) <A HREF="http://pages.ivillage.com/michaelgil01/" TARGET=_blank>http://pages.ivillage.com/michaelgil01/</A> <A HREF="http://http://pages.ivillage.com/michaelgil01/" TARGET=_blank>null</A>[ December 05, 2002: Message edited by: momo ]

MX-3.com

GForce Z3 Fenders

GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders

Re: GForce Z3 Fenders