Removing Hatch Garnish
Removing Hatch Garnish
How tough is it to remove a hatch garnish? Can anyone explain the procedure to remove it. I havn't looked at it yet but i am curious before i break anything. Thanks
Skiddy
94' MX-3 RS Sparkle Green
Suspension Technique Springs
MS Style Nose
OEM Side Skirts
94' MX-3 RS Sparkle Green
Suspension Technique Springs
MS Style Nose
OEM Side Skirts
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: Removing Hatch Garnish
BE CAREFUL...I BROKE A COUPLE OF PLASTIC PIECES REMOVING MINE THE FIRST TIME.<P>You got to remove the interior plastic so you can get to the bolts on the inside that also means removing the brake light too. Then unscrew like five or six bolts that hold the garnish on and the garnish with bolts should come right off from the outside.
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
-
- Regular Member
- Posts: 65
- Joined: November 4th, 2001, 2:01 am
- Location: Ontario, canada
Re: Removing Hatch Garnish
what is a hatch garnish? does it look better without it??
Re: Removing Hatch Garnish
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dave Postle:<BR><STRONG>what is a hatch garnish? does it look better without it??</STRONG><HR></BLOCKQUOTE><P>hahha, no man, u need it, unless u put a GTR wing on or the OEM spoiler from the GS, it's just the black piece that is at the bottom of the rear hatch. Just below it is the little window that says "precidia"<BR>hope that helps!<BR>
Derek Van Horne MX-3.com Member # 33
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
-
- Regular Member
- Posts: 472
- Joined: December 20th, 2001, 2:01 am
- Location: Rochester, NY
Re: Removing Hatch Garnish
you plannig on selling your hatch garnish ?
-
- Regular Member
- Posts: 808
- Joined: September 13th, 2001, 2:01 am
- Location: Ottawa, ON, Canada
- Contact:
Re: Removing Hatch Garnish
hey man I just took sold my hatch garnish cause I put a GS wing on the back. Anyways, why do you have to take the brake light off? I didn't. It's easy enough once you get the trim off.
Re: Removing Hatch Garnish
Yes i plan on selling the garnish, once i paint my spoiler and install it. I should have it up for sale in about another month or so. I don't have time to even look at takeing off the garnish for about a month. Basically i wanted to know of an idea before i get myself into it.
Skiddy
94' MX-3 RS Sparkle Green
Suspension Technique Springs
MS Style Nose
OEM Side Skirts
94' MX-3 RS Sparkle Green
Suspension Technique Springs
MS Style Nose
OEM Side Skirts
-
- Regular Member
- Posts: 550
- Joined: November 4th, 2001, 2:01 am
- Location: San Antonio, Tx
- Contact:
Re: Removing Hatch Garnish
Most people here are not removing there hatch garnish unless they are installing a spoiler I just tried to save them a step.
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
My MX-3 Website
- Typhoonk
- Regular Member
- Posts: 1138
- Joined: December 31st, 2002, 2:01 am
- Location: Bowmanville
- Contact:
Re: Removing Hatch Garnish
is this the hatch garnish?
<img src="http://images.cardomain.com/member_imag ... 78_106.jpg" alt=" - " />
<img src="http://images.cardomain.com/member_imag ... 78_106.jpg" alt=" - " />
-------------------------------------------------------
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info
Re: Removing Hatch Garnish
Yes That is a hatch garnish
Matt
94 Corvette Torch Red RS---SOLD
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456
94 Corvette Torch Red RS---SOLD
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456
Re: Removing Hatch Garnish
1. Remove the plastic trim on the hatch.
2. remove the 6 nuts
3. lift hatch garnish off car.
4. done
I`ll try to take a couple of pics, then you`ll understand right away.
nope-mx3
2. remove the 6 nuts
3. lift hatch garnish off car.
4. done
I`ll try to take a couple of pics, then you`ll understand right away.
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Removing Hatch Garnish
i have a mint hatch garnish for sale if any needs one PM me.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Regular Member
- Posts: 163
- Joined: May 19th, 2004, 2:01 am
- Location: Mtl
Re: Removing Hatch Garnish
i got a 94 RS with hatch garnish and stock wing... can I take those 2 pieces apart ??? (wing and hatch garnish.....)
I want to install my new wing
I want to install my new wing
Re: Removing Hatch Garnish
As far as I know, the RS only have a hatch-garnish, not wing.Originally posted by JeffsCosworth:
i got a 94 RS with hatch garnish and stock wing... can I take those 2 pieces apart ??? (wing and hatch garnish.....)
I want to install my new wing
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
-
- Regular Member
- Posts: 163
- Joined: May 19th, 2004, 2:01 am
- Location: Mtl
Re: Removing Hatch Garnish
i got a wing on it, was an option...