MX-3.com

has anyone here done their dome light, meaning change the bulb to a blue bulb, i have seen some on ebay and im wondering if any one know the size for the bulb in the mx3, if anybody know let me know thanks

i got some blue bubls from canadian tire i think there 94b or something i forget but it turned out to like like a baby blue so i'm gonna put a blue neon in there

Yep - 94R (R for Red) from Canadian Tire! (Great minds think alike).<P>They're $4.86 for a pack of 2..so dont buy on ebay

There are a few different bulbs you can use for the dome. check out this website, it has all the bulb sizes for all the lights in mx-3's. <A HREF="http://www.xtremewhite.com/light_bulbs.cfm" TARGET=_blank>http://www.xtremewhite.com/light_bulbs.cfm</A>

i want to change my lights also, but i don't know how to remove the cover? does it just pop off or do i need a certain tool to remove it? please let me know..

Don't touch the cover. The bulb comes out from the back of the cover. Open the hood and look around the back of the cover, you should find it. I think you turn and pull to get the bulb out.

he is asking about the dome lite!!!<BR>in the manual it shows the lite panel and a small screwdriver prying the 2 ends off. looks like it's upposed to pop off. i know the trunk lite comes off easy with hand pressure alone.

How bout reverse lights??<P>I haven't got my tech manual and haven't played too much yet, easy removal methods??<P>Thanks guys<P>Tawheed

I went with Eurolite Xenon bulbs, what a difference, I can actually see something when i turn them on at night now! Installation is a snap.. Just grab the whole dome and pull down.. the whole unit slides out of the headliner. Unclip the wiring harness. Then take a small flat screwdriver and from the back side push on the tabs, get one side out a bit and the other side will pop out when you pull a bit. By the way, now's the perfect time for some custom painting!