How much should I ask, and what should I do?

V6 Technical/Performance Discussions
Post Reply
valoncan
Regular Member
Posts: 112
Joined: January 22nd, 2004, 2:01 am
Location: Canada
Contact:

How much should I ask, and what should I do?

Post by valoncan »

I have a green MX3 gs.
I am moving to Europe in February, and need to get rid of all my stuff including my MX.
It has a little over 189.000 km and I did a lot of work to it.
Like a brand new disty, cables, new clutch, I just replaced the transmission recently, axels, rear breaks with calipers, new tires, bearings, linking kits for the swaybars, ball joints and stuff, new battery, and all this was done within 6 months.

It needs tranny mounts, drivers door (the window does not work, and it's a bit rusted), needs a rear bumper, and the tank leaks when it's full.
Other than that everything else is in great condition.

Sunroof works, the power options work, i also changed the o2 sensor a while back, like maybe a year ago, cruise works, front breaks are decent for another 20,000 km, front and rear tires are almost brand new still and I also have a set of 16 inch koning rims with no rubber that I am throwing in the deal.
I will make a website this sunday with tons of pictures for it and I will scan all the receipts that I have as well for the parts and stuff that I did to it, post the website here as well.
The thing is that I will no longer be able to reside in Canada, as of February 16 I have to leave the country, so yeah I am getting deported back to where I came from :confused: :confused: :crying: :crying:
It'd be great if I could just sell the whole thing, let me know what you guys think about 2000 canadian as is??

<small>[ November 12, 2004, 07:33 PM: Message edited by: valoncan ]</small>
Never think that you will get two if you don't give one!!
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Re: How much should I ask, and what should I do?

Post by hgallegos915 »

well at least your not going back to a crappy country like mexico (im from there) why are u getting deported? on the mx3./wel i think u can sell it for around 2000 can dollars and mayeb 1500 us dollars. That tank issue is kinda of a big issue. Since its hard to get that pipe that rusts out.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: How much should I ask, and what should I do?

Post by Nd4SpdSe »

Originally posted by hgallegos915:
That tank issue is kinda of a big issue. Since its hard to get that pipe that rusts out.
Which pipe are you talking about? I'm asking cause my gas tank need to get replaced
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Re: How much should I ask, and what should I do?

Post by hgallegos915 »

I believe its the pipe where you fuel gas into, my moms escort gt has that issue. if we ever fill it up to the top, it spills it even if the top is closed o.0/ I heard you can only get these off a junk yard. I have not yet come across this problem with my mx3, and i hoping o wont. I only mentioned it since i had seen a few poeples posts on this.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
valoncan
Regular Member
Posts: 112
Joined: January 22nd, 2004, 2:01 am
Location: Canada
Contact:

Re: How much should I ask, and what should I do?

Post by valoncan »

I had it checked, it is not the pipe actually, it's the actual tank leaking!

Anybody wants to offer me something, or should I start parting her out?
Never think that you will get two if you don't give one!!
valoncan
Regular Member
Posts: 112
Joined: January 22nd, 2004, 2:01 am
Location: Canada
Contact:

Re: How much should I ask, and what should I do?

Post by valoncan »

MY GS IS ACTUALLY FOR SALE!!

Asking $2200 CAD

Check www.freewebs.com/mazda_mx3
or the london and area auto trader:

http://www.trader.ca/Search/Details.asp?mknm=739&Region=700&subcategory=&CAT=1
Never think that you will get two if you don't give one!!
Post Reply

Return to “V6 Technical/Performance”