Page 1 of 1
need headers
Posted: November 9th, 2004, 3:00 pm
by Legato626
Well i am planing on geting my hole exhaust system i am looking for some good headers that would work good with magnaflow exhaust. The exhaust is going to be with a high-flow cat and a 5" SS muffler with damper and i am useing 2.25" pipeing (becuase the muffler doesnt come in 2.5"....). But ya i am just looking on what would be a good set of header and where could i get them?
![Froggie Red :froggie_red:](./images/smilies/froggie_red.gif)
Re: need headers
Posted: November 9th, 2004, 6:02 pm
by TsiMiata
Your only option is to use headers for the probe/mx-3. Hotshot and OBX are the two bands most people use. I think pacesetter and bosal make them also. The pacesetters are garbage from everything I have heard.
Re: need headers
Posted: November 9th, 2004, 9:18 pm
by Legato626
Is there certent headers off probes becuase i found 2 sets but i am not shere if they will work or not.
http://hotshot.com/hotshotheaders/fm3050.html
http://hotshot.com/hotshotheaders/fm3051.html
Would eather one or just one of these work for a mx-3 GS 1.8L DOHC?
Re: need headers
Posted: November 9th, 2004, 9:53 pm
by mxmaz
Yes those work i think the cat just has to be moved back a little bit. I would think you will be getting a high flow cat put on the same time anyway. The first ones you would want on a 94. I think the 96 ones are for obd2 (someone correct me if im wrong)
<small>[ November 09, 2004, 08:56 PM: Message edited by: mxmaz ]</small>
Re: need headers
Posted: November 9th, 2004, 9:59 pm
by mxmaz
Re: need headers
Posted: November 10th, 2004, 8:14 am
by Legato626
o sweet thanks man, ya that price was making me twitch =).
![Bow Down :bowdown:](./images/smilies/bowdown.gif)
Re: need headers
Posted: November 10th, 2004, 8:32 am
by Legato626
hey do i still need a cat for these headers or is that just part of the pipe?
Re: need headers
Posted: November 10th, 2004, 8:54 am
by TsiMiata
you'll need a cat also. The stock cat won't bolt up to the headers. I got a magnaflow/carsound one of ebay for ~$80. You'll need a shop to weld flanges on the cat and shorten up the catback to make everything work.