MX-3.com

does the 2.5 mx6 clutch fit in the 1.8 mx3?

ie: street-import.com
sells clutchs for the 1.8 for 440 dollars

and the mx6 for 380 dollars.

so can i just tak the mx6 clutch and dump it in?

im guessing i can and save myself a bit of money.... also an engine swap will be done in the future so wondering if that will work

YEs it should, basically the same tranny(besides 5th gear)and same block. We just have a smaller flywheel.

Thanks:)
just saved me 60 dollars:)

Yep. I'm running a 2.5 tranny on my 1.8 with 2.5 Act Clutch. Works great

mx3 GS clutch = MX6 LS clutch = Probe GT clutch = Protege LX clutch = Capri XR2 clutch = Mazda Miata 1.8 clutch = Escort GT clutch = Mercury Tracer LTS clutch = Mazdaspeed protege clutch = 626 ES V6 clutch..................list goes on

i just ordered a centreforce dual friction
for a mx6 to fit into my mx3 1.8

cost 375 CAD inc tax.

sweet

They arnt all the same, just I know the 2.5L is slightly bigger than the 1.8L , but still works.

Harlem~~

I was told that if I order a clutch from CM, to order the MX-6 clutch and NOT the MX-3. I was told it is suppose to be 10mm bigger..thus, 10mm more grip. Would you concur?

~CHANKO

<small>[ April 06, 2004, 03:38 PM: Message edited by: CHANKO ]</small>

chanko - you're right I fitted the mx-6 one when I did my KLZE & side by side the mx6 is 10mm bigger

stock G-series transmission clutch size is 225mm A few of the lower powered cars have 215mm versions, but it doens't matter. All of the clutches are interchangeable between flywheels so 225 or 215 is up to you.

I'm using a MX3 ACT and it was 225mm when I pulled it out of the box, so who knows.

Si & Harlem~~

Thanks! I believe I'll go with the wider as well.