kl-31 speed govenor removal ??

V6 Technical/Performance Discussions
Post Reply
aaronthehic
Regular Member
Posts: 603
Joined: August 19th, 2002, 2:01 am
Location: Guelph Ontario Canada

kl-31 speed govenor removal ??

Post by aaronthehic »

I have the kl-31 ecu i beleive and now need to drive over 180kph .which wire do I cut or sensor remove?
13.023 @ 105 mph
Top
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:
Contact timpronk

Re: kl-31 speed govenor removal ??

Post by timpronk »

just trade the ze ecu for my 1.8 ecu and you can go over 180, and we are all happy.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
Top
Spydie
Regular Member
Posts: 1161
Joined: January 14th, 2003, 2:01 am
Location: Ottawa, Ontario, Canada
Contact:
Contact Spydie

Re: kl-31 speed govenor removal ??

Post by Spydie »

agreed......I've topped mine out at 210 kph
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
Top
aaronthehic
Regular Member
Posts: 603
Joined: August 19th, 2002, 2:01 am
Location: Guelph Ontario Canada

Re: kl-31 speed govenor removal ??

Post by aaronthehic »

thank you everyone for your help, how nice of you to give up your 1.8 ecu so readily :roll:
13.023 @ 105 mph
Top
aaronthehic
Regular Member
Posts: 603
Joined: August 19th, 2002, 2:01 am
Location: Guelph Ontario Canada

Re: kl-31 speed govenor removal ??

Post by aaronthehic »

It's pulling the m1 pin off the ecu just for closure.
13.023 @ 105 mph
Top
Post Reply

Return to “V6 Technical/Performance”